A true simulation environment

Because many users are first taking part in the exams, so for the exam and test time distribution of the above lack certain experience, and thus prone to the confusion in the examination place, time to grasp, eventually led to not finish the exam totally. In order to avoid the occurrence of this phenomenon, the Building HP SDN and FlexNetwork Solutions study question have corresponding products to each exam simulation test environment, users log on to their account on the platform, at the same time to choose what they want to attend the exam simulation questions, the HP0-Y51 exam questions are automatically for the user presents the same as the actual test environment simulation test system, the software built-in timer function can help users better control over time, so as to achieve the systematic, keep up, as well as to improve the user's speed to solve the problem from the side with our HP0-Y51 test guide.

Concise contents

The HP0-Y51 exam questions by experts based on the calendar year of all kinds of exam after analysis, it is concluded that conforms to the exam thesis focus in the development trend, and summarize all kind of difficulties you will face and highlight the user review must master the knowledge content. And unlike other teaching platform, the Building HP SDN and FlexNetwork Solutions study question is outlined the main content of the calendar year examination questions didn't show in front of the user in the form of a long time, but as far as possible with extremely concise prominent text of HP0-Y51 test guide is accurate incisive expression of the proposition of this year's forecast trend, and through the simulation of topic design meticulously.

A brief introduction to the course

For most users, access to the relevant qualifying examinations may be the first, so many of the course content related to qualifying examinations are complex and arcane. According to these ignorant beginners, the HP0-Y51 exam questions set up a series of basic course, by easy to read, with corresponding examples to explain at the same time, the Building HP SDN and FlexNetwork Solutions study question let the user to be able to find in real life and corresponds to the actual use of learned knowledge, deepened the understanding of the users and memory. Simple text messages, deserve to go up colorful stories and pictures beauty, make the HP0-Y51 test guide better meet the zero basis for beginners, let them in the relaxed happy atmosphere to learn more useful knowledge, more good combined with practical, so as to achieve the state of unity.

Our Building HP SDN and FlexNetwork Solutions study question has high quality. So there is all effective and central practice for you to prepare for your test. With our professional ability, we can accord to the necessary testing points to edit HP0-Y51 exam questions. It points to the exam heart to solve your difficulty. With a minimum number of questions and answers of HP0-Y51 test guide to the most important message, to make every user can easily efficient learning, not to increase their extra burden, finally to let the HP0-Y51 exam questions help users quickly to pass the exam.

DOWNLOAD DEMO

HP Building HP SDN and FlexNetwork Solutions Sample Questions:

1. A company is considering TRILL and SPBM as options for the data center architecture. The company is interested in how the solution handles load-balancing unicast traffic. What correctly describes the TRILL and SPBM options?

A) TRILL can use Equal Cost Multi-Path (ECMP). SPBM selects one best path to each SPBM switch in each B-VLAN, but can select different paths for different B-VLANs
B) Both SPBM and TRILL can use Equal Cost Multi-Path (ECMP) to load-balance unicasts.
provided that ECMP is enable at hardware level.
C) SPBM can use Equal Cost Multi-Path (ECMP). TRILL does not support ECMP for unicasts, but can load-balance multicast, depending on the tree configuration.
D) Neither SPBM nor TRILL can use Equal Cost Multi-Path (ECMP). Both technologies can send traffic for different VLAN VLANs or I-SIDs on different links.

2. Table of Acronyms

Refer to the exhibit.

The switch shown in the exhibit should from a TRILL region. For Switch 1 interface ten1/0/22, what is a valid port link-type and TRILL port type?

A) port link type = trunk port that permits VLMs 10 and 20 TRILL- port type = TRILL access port
B) port link type = access port in any VLAN TRILL port type = TRILL access port
C) port link type = access port in any VLAN TRILL port type = TRILL trunk port
D) port link type = hybrid port with untagged VLANs 10 and 20 TRILL port type = TRILL hybrid port

3. Refer to the exhibit. (Note: the IDs in the exhibit have been truncated to simplify references to them) An administrator creates user "monitor", who should have read only access to the HP VLAN SDN Controller. The administrator needs to enter this command to finish up the user account.

keystone user-add-role - -user-ID ID1 - - tenant-id ID2 - -role-ID ID3
What are the correct values for ID1, ID2, and ID3?

A) ID1 = a6; ID2 = 0c; ID3=94
B) ID1 = 9b; ID2 = a6; ID3=d0
C) ID1 = 94; ID2 = a6; ID3=0c
D) ID1 = a6; ID2 = 0c; ID3=d0

4. Table of Acronyms An administrator has configured an HP Comware switch to support FCoE in Fibre Channel Forwarder (FCF) mode. A switch interface, ten1/0/1, connects to a sewer FC host bus adapter (HBA), The HBA should send storage traffic in VSAN 2, which is associated with VLAN 20.

How should the administrator assign FC traffic for this HBA to VSAN 2?

A) By configuring ten1/0/1 as an F-mode FC port and specifying VSAN2 as the port access VSAN
B) By accessing the VSAN 2 configuration view and adding ten1/0/1 as a trunk port
C) By binding a VFC interface to ten1/0/1 and specifying VSAN 2 as the VFC interface trunk VSAN
D) By accessing the VLAN 20 configuration view and specifying ten1/0/1 as a member port of the VLAN

5. A company has HP MultiService Mobility (MSM) APs that receive DHCP addresses on several different subnets. The APs are controlled by an MSM Controller. The company is considering replacing the MSM Controller with a Unified Wired-Wireless controller. The administrator runs a proof of concept test in which some of these APs are discovered and controlled by the Unified Wired-Wireless controller. Now the administrator wants to return the APs to being controlled by the MSM Controller.
The network administrator performs these actions:
-Ensures that the Colubris vendor-specific option in each AP subnet DHCP scope references the
MSM Controller IP address -Reboots the APs. The MSM Controller never succeeds in discovering the APs. A debug reveals that the APs are not contacting the controller at all.
Which action could fix this problem?

A) Reset the APs to the factory default settings
B) Upload MSM software to the HP Wired-Wireless controller flash.
C) In each AP DHCP scope, delete the Colubris vendor-specific option
D) Add a DNS host entry that maps hp example com to 10.1.10.20.

Solutions: