[2023] Get Top-Rated Microsoft AZ-720 Exam Dumps Now [Q51-Q72]

Share

[2023] Get Top-Rated Microsoft AZ-720 Exam Dumps Now

Passing Key To Getting AZ-720 Certified Exam Engine PDF

NEW QUESTION # 51
A company uses public Azure DNS zones.
The company reports DNS record creation and name resolution issues.
You need to troubleshoot the issues.
What are the causes of the issues?

Answer:

Explanation:


NEW QUESTION # 52
A company has an Azure virtual network (VNet). An administrator creates a subet in the VNet named AzureSastionSubnet. The administrator deploys Azure Bastion to AzureBastionSubnet.
The administrator creates a default network security group named nsg-Bastion. The following error message display when the administrator attempts to assign nsg-Bastion to AzureBastionSubnet:
Network security group nsg-Bastion does not have necessary rules for Azure Bastion Subnet AzureBastionSubnet You need to resolve the issues with the inbound security rules.
Which port or set of ports should you configure?

Answer:

Explanation:


NEW QUESTION # 53
A company uses an Azure Virtual Network (VNet) gateway named VNetGW1. VNetGW1 connects to a
partner site by using a site-to-site VPN connection with dynamic routing.
The company observes that the VPN disconnects from time to time.
You need to troubleshoot the cause for the disconnections.
What should you verify?

  • A. The partner's VPN device and VNetGW1 are configured with the same virtual network address space.
  • B. The public IP address of the partner's VPN device is configured in the local network gateway address
    space on VNetGW1.
  • C. The partner's VPN device is configured for one VPN tunnel per subnet pair.
  • D. The partner's VPN device and VNetGW1 are configured using the same shared key.

Answer: D


NEW QUESTION # 54
A company uses Azure virtual machines (VMs) in multiple regions. The VMs have the following configuration:

The backend pool of an internal Azure Load Balancer (ILB) named ILB1 contains VM1 and VM2. The ILB uses the Basic SKU and is in a resource group RG2.
Virtual network peering has been configured between VNet1 and VNet2.
Users report that they are unable to connect to resources on VM1 and VM2 by using ILB1 from VM3.
You need to resolve the connectivity issues.
What should you do?

  • A. Move VM1 and VM2 into RG3.
  • B. Redeploy VM1 and VM2 into availability zones.
  • C. Redeploy the ILB using the Standard SKU.
  • D. Move ILB1 to RG1.

Answer: C

Explanation:
To resolve the connectivity issues, you need to redeploy the ILB using the Standard SKU. According to 1, Basic Load Balancer does not support Global VNet Peering, which is required for cross-region communication between VMs in different VNets. Standard Load Balancer supports Global VNet Peering and can load balance traffic across regions and availability zones.


NEW QUESTION # 55
A company uses Azure Site Recovery (ASR) to replicate and recover Azure virtual machines (VM) between Azure regions.
An administrator receives the following warning from ASR about a VM that uses P10 disks: Data change rate beyond supported limits You add OS Disk Write Bytes/Sec and Data Disk Write Bytes/Sec to the list of metrics for monitoring. You discover that the VM consistently has a data churn of greater than 8 MB/s but less than 10 MB/s.
You need to resolve the issue.
What should you do?

  • A. Create a network service endpoint in a virtual network.
  • B. Upgrade the target storage disk.
  • C. Use AzCopy to upload data to a cache storage account.
  • D. Uninstall the Volume Shadow Copy Service (VSS) Provider service.

Answer: B

Explanation:
Azure Site Recovery has limits on data change rates depending on the type of disk used for replication. If a VM has a data change rate higher than the supported limit for its disk type, it can cause replication issues or errors. To resolve this issue, you can upgrade the target storage disk to a higher tier that supports higher data change rates.


NEW QUESTION # 56
A company has an Azure Virtual Network gateway named VNetGW1. The company enables point-to-site connectivity on VNetGW1. An administrator configures VNetGW1 for the following:
OpenVPN for the tunnel type.
Azure certificate for the authentication type.
Users receive a certificate mismatch error when connecting by using a VPN client.
You need to resolve the certificate mismatch error.
What should you do?

  • A. Configure preshared key for authentication on the VPN profile.
  • B. Reissue the client certificate with server authentication enabled.
  • C. Install an IKEv2 VPN client on the user's computers.
  • D. Reissue the client certificate with client authentication enabled.

Answer: B


NEW QUESTION # 57
A customer creates an Azure resource group named RG1 in the East US region. RG1 contains the following resources:

The customer performs the following tasks:
Create a private endpoint for sqlsrv1 in subnet2 with the private IP address of 192.168.2.100.
Create a private DNS zone named privatelink.database.windows.net by using a single A record named sqlsvr1 and the IP address 192.168.2.100.
Disable public access by using the public endpoint for sqlsvr1.
The customer reports that connections from VM1 to DB1 are failing. The solution must allow connections from VM1 to DB1 without making platform-level changes.
You need to troubleshoot and resolve the issue.
What should you do?

Answer:

Explanation:


NEW QUESTION # 58
A company uses Azure Site Recovery for their on-premises Hyper-V servers. The company manages servers
by using System Center Virtual Machine Manager (SCVMM).
An administrator reports that replication to the secondary site has failed.
You need to inspect the SCVMM logs and configuration files.
Which PowerShell cmdlets should you use?

Answer:

Explanation:


NEW QUESTION # 59
A customer has an Azure Virtual Network named VNet1 that contains an internal standard SKU load balancer named LB1. The backend pool for LB1 includes the following virtual machines: VM1, VM2.
The customer configures a rule named Rul1 to load balance incoming HTTPS requests for VM1 and VM2. Rule1 is associated with an HTTPS health probe. The path for the probe is set to /.
The network adapters of VM1 and VM2 are associated with a network security named NSG1 that contains the following rules:

You connect to https://VM1 and https://VM2 from VNet1. Attempts to connect using the front-end IP address of LB1 are failing.
You need to resolve the issue.
What should you do?

  • A. Add an NSG1 rule with the source set to VirtualNetwork.
  • B. Change the health probe associated with Rule1 to use TCP.
  • C. Change the health probe associated with Rule1 to use HTTP.
  • D. Add an NSG1 rule with the source set to AzureLoadBalancer.

Answer: D

Explanation:
According to Microsoft, Azure Load Balancer health probes originate from the IP address 168.63.129.16 and must not be blocked for probes to mark your instance as up. The AzureLoadBalancer service tag identifies this source IP address in your network security groups and permits health probe traffic by default1. https://learn.microsoft.com/en-us/azure/load-balancer/load-balancer-custom-probe-overview


NEW QUESTION # 60
A company plans to use an Azure PaaS service by using Azure Private Link service. The azure Private Link
service and an endpoint have been configured.
The company reports that the endpoint is unable to connect to the service.
You need to resolve the connectivity issue.
What should you do?

  • A. Disable the endpoint network policies.
  • B. Validate the VPN device.
  • C. Approve the connection state.
  • D. Disable the service network policies.

Answer: D


NEW QUESTION # 61
A company uses an Azure Virtual Network (VNet) gateway named VNetGW1. VNetGW1 connects to a partner site by using a site-to-site VPN connection with dynamic routing.
The company observes that the VPN disconnects from time to time.
You need to troubleshoot the cause for the disconnections.
What should you verify?

  • A. The partner's VPN device and VNetGW1 are configured with the same virtual network address space.
  • B. The public IP address of the partner's VPN device is configured in the local network gateway address space on VNetGW1.
  • C. The partner's VPN device is configured for one VPN tunnel per subnet pair.
  • D. The partner's VPN device and VNetGW1 are configured using the same shared key.

Answer: D


NEW QUESTION # 62
A company has an Azure tenant. The company deploys an Azure Firewall named FW1 using the Standard SKU. You configure FW1 using classic firewall rules.
The company creates an application rule collection with the following settings:
Priority: 100
Action: Deny
Rule type: FQDN
Source type: IP address
Source: *
Protocol: http:80,https:443
Target FQDN: *.cloud.contoso.com
An engineer observes that traffic to console.cloud.conotoso.com is still allowed by FW1.
You need to determine why the traffic is allowed.
What should you review?

  • A. Web categories
  • B. Application rules
  • C. Infrastructure rules
  • D. Network rules

Answer: D

Explanation:
To determine why the traffic is allowed, you should review network rules. According to 3, Azure Firewall uses network rules to allow or deny traffic based on source and destination IP address, port, and protocol. Network rules are applied before application rules and have higher priority than application rules. Therefore, if there is a network rule that allows traffic to console.cloud.contoso.com on port 80 or 443, it will override the application rule that denies traffic based on FQDN.


NEW QUESTION # 63
A company migrates an on-premises Windows virtual machine (VM) to Azure. An administrator enables backups for the VM by using the Azure portal.
The company reports that the Azure VM backup job is failing.
You need to troubleshoot the issue.
What should you do?

  • A. Create a new manual backup in Backup center.
  • B. Configure the retention range of the current backup policy for the VM.
  • C. Install the VM guest agent with administrative permissions.
  • D. Run chkdsk on the VM.
  • E. Enable replication and create a recovery plan for the backup vault.

Answer: C


NEW QUESTION # 64
A company plans to implement ExpressRoute by using the provider connectivity model.
The company creates an ExpressRoute circuit. You are unable to connect to resources through the circuit.
You need to determine the provisioning state of the service provider.
Which PowerShell cmdlet should you run?

  • A. Get-AzExpressRouteCircuit
  • B. Get-AzExpressRouteCircuitRouteTable
  • C. Get-AzExpressRouteCircuitARPTable
  • D. Get-AzExpressRouteCircuitPeeringConfig
  • E. Get-AzExpressRouteCircuitConnectionConfig

Answer: B

Explanation:
To determine the provisioning state of the service provider, you should run the PowerShell cmdlet Get-AzExpressRouteCircuit. According to 1, this cmdlet returns information about an ExpressRoute circuit, including its provisioning state and service provider status. You can use these properties to check if your circuit is enabled by both Azure and your connectivity provider.


NEW QUESTION # 65
A company deploys ExpressRoute.
The company reports that there is an autonomous system (AS) number mismatch.
You need to identify the AS number of the circuit.
Which PowerShell cmdlet should you run?

  • A. Get-AzExpressRouteCircuitPeeringConfig
  • B. Get-AzExpressRouteCircuitStats
  • C. Get-AzExpressRouteCircuitRouteTable
  • D. Get-AzExpressRouteCircuit

Answer: D

Explanation:
To identify the AS number of the circuit when there is an autonomous system (AS) number mismatch in ExpressRoute, you should run the Get-AzExpressRouteCircuit PowerShell cmdlet. Therefore, option D is correct. You should run the Get-AzExpressRouteCircuit PowerShell cmdlet.


NEW QUESTION # 66
A company uses Azure Site Recovery (ASR) to replicate and recover Azure virtual machines (VM) between Azure regions.
An administrator receives the following warning from ASR about a VM that uses P10 disks: Data change rate beyond supported limits You add OS Disk Write Bytes/Sec and Data Disk Write Bytes/Sec to the list of metrics for monitoring. You discover that the VM consistently has a data churn of greater than 8 MB/s but less than 10 MB/s.
You need to resolve the issue.
What should you do?

  • A. Create a network service endpoint in a virtual network.
  • B. Upgrade the target storage disk.
  • C. Use AzCopy to upload data to a cache storage account.
  • D. Uninstall the Volume Shadow Copy Service (VSS) Provider service.

Answer: B


NEW QUESTION # 67
A company manages a solution that uses Azure Functions.
A function returns the following error: Azure Function Runtime is unreachable.
You need to troubleshoot the issue.
What are two possible causes of the issue?

  • A. The storage account for the function was deleted.
  • B. The execution quota is full.
  • C. The company did not configure a timer trigger.
  • D. The storage account application settings were deleted.
  • E. The function key was deleted.

Answer: A,D

Explanation:
Two possible causes of the issue where a function returns the error "Azure Function Runtime is unreachable" are: C. The storage account application settings were deleted. E. The storage account for the function was deleted.
According to Microsoft, this issue occurs when the Functions runtime can't start. The most common reason for this is that the function app has lost access to its storage account. If that account is deleted or if the storage account application settings were deleted, your functions won't work
https://learn.microsoft.com/en-us/azure/azure-functions/functions-recover-storage-account


NEW QUESTION # 68
A company has an Azure Active Directory (Azure AD) tenant. You are assigned the Owner role-based access control (RBAC) role of an Azure resource group named RG1.
An administrator grants a user named User1 the Contributor RBAC role for RG1. User1 receives an authorization error when attempting to create a Cosmos DB account in RG1.
The administrator verifies that they can create a Cosmos DB account in RG1.
You need to troubleshoot the issue.
What should you do?

Answer:

Explanation:


NEW QUESTION # 69
A company has an Azure virtual network (VNet). An administrator creates a subet in the VNet named AzureSastionSubnet. The administrator deploys Azure Bastion to AzureBastionSubnet.
The administrator creates a default network security group named nsg-Bastion. The following error message display when the administrator attempts to assign nsg-Bastion to AzureBastionSubnet:
Network security group nsg-Bastion does not have necessary rules for Azure Bastion Subnet AzureBastionSubnet You need to resolve the issues with the inbound security rules.
Which port or set of ports should you configure?

Answer:

Explanation:


NEW QUESTION # 70
A company deploys a new file sharing application on four Standard_D2_v3 virtual machines (VMs) behind an
Azure Load Balancer. The company implements Azure Firewall.
Users report that the application is slow during peak usage periods. An engineer reports that the peak usage for
each VM is approximately 1 Gbps.
You need to implement a solution that support a minimum of 10 Gbps.
What should you do to increase the throughput?

  • A. Move two of the servers behind a separate load balancer and configure round robin routing in Traffic Manager.
  • B. Disable the Azure Firewall and implement network security groups in its place.
  • C. Request an increase in networking quotas.
  • D. Increase the size of the VM instance.

Answer: A


NEW QUESTION # 71
A company enables just-in-time (JIT) virtual machine (VM) access in Azure.
An administrator observes a list of VMs on the Unsupported tab of the JIT VM access page in the Microsoft Defender for Cloud portal.
You need to determine why some VMs are not supported for JIT VM access.
What should you conclude?

  • A. A network security group is not associated with the VMs.
  • B. The administrator does not have the SecurityReader role.
  • C. The administrator is using the Microsoft Defender for Cloud free tier.
  • D. The client firewall does not allow port 22 on the VMs.

Answer: D


NEW QUESTION # 72
......


The Microsoft Azure platform is one of the most popular cloud computing platforms in the world. With its vast array of services, it has become the go-to platform for businesses looking to take advantage of the benefits of cloud computing. However, like any platform, Azure is not without its challenges. One of the most common issues faced by Azure users is connectivity issues. These issues can be caused by a variety of factors, including network issues, misconfigured settings, and security issues.

 

AZ-720 exam questions for practice in 2023 Updated 104 Questions: https://www.actual4labs.com/Microsoft/AZ-720-actual-exam-dumps.html

AZ-720 Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=15HFDw2tIC7eprEsn0_1jcnJfOhDGApM-

Contact Us

If you have any question please leave me your email address, we will reply and send email to you in 12 hours.

Our Working Time: ( GMT 0:00-15:00 )
From Monday to Saturday

Support: Contact now