All Obstacles During C_CPI_2404 Exam Preparation with C_CPI_2404 Real Test Questions [Q29-Q46]

All Obstacles During C_CPI_2404 Exam Preparation with C_CPI_2404 Real Test Questions

Fully Updated Free Actual SAP C_CPI_2404 Exam Questions

NEW QUESTION # 29
You want to build an architecture that is largely asynchronous. Which design do you use to exchange notifications between the partners involved?

• A. Request-driven design
• B. Hexagonal design
• C. Serverless design
• D. Event-driven design

Answer: D

Explanation:
You can use an OData adapter to implement a synchronous call to a remote HTTP API as an integration flow component. An OData adapter allows you to send and receive messages using the OData protocol. OData stands for Open Data Protocol and is a standard for exposing and consuming data over HTTP or HTTPS. You can use an OData adapter to communicate with OData services that support CRUD (Create, Read, Update, Delete) operations on resources. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP

NEW QUESTION # 30
Using the Test Connectivity function, you want to test a connection to a backend system. The connection is provided by a Cloud Connector. Which parameter is required for the connection test?

• A. Connector ID
• B. Host
• C. Subaccount ID
• D. Location ID

Answer: D

Explanation:
To test a connection to a backend system that is provided by a Cloud Connector, you must specify the location ID as a parameter for the connection test. The location ID is a unique identifier that represents a Cloud Connector instance in a specific network location. It is used to route requests from SAP Integration Suite to the correct Cloud Connector instance and then to the backend system. You can find the location ID in the Cloud Connector administration UI under Configuration Location ID. Reference: Cloud Connector Connectivity Tests | SAP Help Portal, Cloud Connector Configuration | SAP Help Portal

NEW QUESTION # 31
You want to send messages over an SOAP adapter to an integration flow. Which method do you use to send the messages?

• A. GET
• B. UPDATE
• C. PATCH
• D. POST

Answer: D

Explanation:
To send messages over a SOAP adapter to an integration flow, you must use the POST method. The POST method is used to create or update a resource on the server using the SOAP message body as the input. The SOAP adapter supports both SOAP 1.1 and SOAP 1.2 protocols and can handle both one-way and request-reply message exchange patterns. The SOAP adapter can be configured as a sender or a receiver channel in an integration flow. Reference: SOAP (SOAP 1.x) Adapter | SAP Help Portal, SOAP Sender Adapter: Example Integration Flow | SAP Help Portal

NEW QUESTION # 32
You want to access individual entities of an HTTP call over XPath. What must you do if no namespace mapping exists?

• A. Remove the namespaces.
• B. Convert the namespaces to XML
• C. Remove the XML prolog.
• D. Convert the namespaces to JSON.

Answer: A

Explanation:
If no namespace mapping exists, you must remove the namespaces to access individual entities of an HTTP call over XPath. Namespaces are prefixes that identify the source or context of an XML element or attribute. If the namespaces are not mapped to a URI, they can cause errors or conflicts when using XPath expressions. Therefore, you must remove the namespaces before applying XPath queries.
Modernize Integration with SAP Integration Suite | openSAP

NEW QUESTION # 33
You have created an API provider of the type Internet. What http response code indicates success?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: D

Explanation:
The http response code that indicates success is 200. The 200 response code means that the request was successfully processed and the response contains the expected data. Other response codes in the 2xx range also indicate success, but with some variations. For example, 201 means that a resource was created, 202 means that a request was accepted but not completed yet, and 204 means that there is no content in the response. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP

NEW QUESTION # 34
What are target endpoints of an API? Note: There are 3 correct answers to this question.

• A. API provider
• B. Resources
• C. API proxy
• D. API consumer
• E. URL of original API

Answer: A,C,E

Explanation:
he target endpoints of an API are the API provider, the API proxy, and the URL of the original API. The API provider is the system or application that exposes the interface and functionality of the API. The API proxy is the intermediary component that mediates the requests and responses between the API consumer and the API provider. The URL of the original API is the address that identifies the location and resource of the API. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP

NEW QUESTION # 35
Which part of the proxy URL is provided by the initial configuration step of the API Management?

• A. Virtual host
• B. Name of the API management
• C. Service name
• D. Version

Answer: A

Explanation:
To set up the API Management capability within SAP Integration Suite, you must provide a virtual host as part of the initial configuration step. The virtual host is a host alias that identifies your organization and is used as the base URL of your API proxies. For example, if your virtual host is myorg, your API proxy URL will look like this: https://myorg.apimanagement.hana.ondemand.com/<api-name>. The virtual host can be changed later in the API portal settings. Reference: Setting Up API Management Capability | SAP Help Portal, Virtual Hosts | SAP Help Portal

NEW QUESTION # 36
What does an API consumer do?

• A. It provides the server-side implementation of an interface.
• B. It provides an interface.
• C. It invokes an interface.

Answer: C

Explanation:
An API consumer is an application or system that invokes an interface provided by an API provider. An API consumer uses the interface to access or manipulate data or functionality exposed by the API provider. An API consumer can be a web browser, a mobile app, a cloud service, or any other client that can send requests and receive responses from an API provider. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP

NEW QUESTION # 37
Which of the following can you use for an XSLT mapping in an integration flow?

• A. XML
• B. PHP
• C. JSON
• D. HTML

Answer: A

Explanation:
To use an XSLT mapping in an integration flow, you must use XML as the input and output format. XSLT stands for Extensible Stylesheet Language Transformations, which is a language for transforming XML documents into other XML documents or other formats. An XSLT mapping consists of an XSLT stylesheet that defines the rules for transforming the source XML document into the target XML document. You can use an XSLT mapping step in an integration flow to apply an XSLT transformation to the message body. Reference: XSLT Mapping | SAP Help Portal, XSLT - W3Schools

NEW QUESTION # 38
In the Cloud Integration capability within SAP Integration Suite, which internal message format is used?

• A. XML
• B. XSLT
• C. JSON

Answer: A

Explanation:
In the Cloud Integration capability within SAP Integration Suite, XML is the internal message format that is used. XML stands for Extensible Markup Language and is a standard format for representing structured data. All messages that are processed by the Cloud Integration capability are converted to XML internally and then transformed to the desired format at the outbound channel. Reference: Modernize Integration with SAP Integration Suite | openSAP

NEW QUESTION # 39
You want to split a message that contains recurring child nodes. Which of the following splitter types can you use? Note: There are 2 correct answers to this questions.

• A. EDI Splitter
• B. General Splitter
• C. PKCS#7/CMS Splitter
• D. Iterating Splitter

Answer: B,D

Explanation:
To split a message that contains recurring child nodes, you can use a General Splitter or an Iterating Splitter. A General Splitter allows you to split a message based on an XPath expression that defines the splitting criteria. An Iterating Splitter allows you to split a message based on an XPath expression that defines the repeating element. Reference: Modernize Integration with SAP Integration Suite | openSAP

NEW QUESTION # 40
Which of the following capabilities within SAP Integration Suite are core for integration? Note: There are 3 correct answers to this question.

• A. API Management
• B. Open Connectors
• C. Cloud Integration
• D. Integration Assessment
• E. Integration Advisor

Answer: A,C,D

Explanation:
The following capabilities within SAP Integration Suite are core for integration: Integration Assessment, Cloud Integration, and API Management. Integration Assessment allows you to evaluate your integration landscape and strategy and identify the best-fit integration technologies and tools for your scenarios. Cloud Integration allows you to design, deploy, and monitor integration flows between cloud and on-premise systems using various adapters and protocols. API Management allows you to create, publish, secure, and monitor APIs across different environments and platforms. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP

NEW QUESTION # 41
What kind of editor can you use to manipulate integration flows?

• A. Code editor
• B. Graphical editor
• C. Command-line editor

Answer: B

Explanation:
To manipulate integration flows, you can use a graphical editor that is provided by SAP Integration Suite. The graphical editor allows you to visualize and edit your integration flows using a drag-and-drop interface. It also provides a palette of icons that represent different integration components and actions, such as senders, receivers, routers, mappers, transformers, and so on. You can use the graphical editor to design and configure complex integration scenarios in a user-friendly way. Reference: Overview of Integration Flow Editor | SAP Help Portal, Design and Deploy Your First Integration Flow | SAP Tutorials

NEW QUESTION # 42
You have set up a basic authentication policy, but the API proxy returns an HTTP status of 401.What could be a reason?

• A. In the AssignMessage policy, the AssignTo tag has the type="postFlow"
• B. In the AssignMessage policy, the AssignTo tag has the type="preflow"
• C. In the AssignMessage policy, the Assign To tag has the type="response"
• D. In the AssignMessage policy, the AssignTo tag has the type="request"

Answer: C

Explanation:
A possible reason why the API proxy returns an HTTP status of 401 after setting up a basic authentication policy is that in the AssignMessage policy, the AssignTo tag has the type="response". This means that the basic authentication value is assigned to the response header instead of the request header. This will cause an authentication failure when calling the backend server or service that requires basic authentication. To fix this issue, you should change the type attribute of the AssignTo tag to type="request". This will ensure that the basic authentication value is assigned to the request header before sending it to the target endpoint. Reference: Basic Authentication | SAP Help Portal, Assign Message Policy | SAP Help Portal

NEW QUESTION # 43
Where can you configure a static payload? Note: There are 2 correct answers to this question.

• A. In a Content Modifier component of the Message Header tab
• B. In a Groovy script
• C. In a Data Store Operation component
• D. In a Content Modifier component of the Message Body tab

Answer: C,D

Explanation:
You can configure a static payload in a Data Store Operation component or in a Content Modifier component of the Message Body tab. A Data Store Operation component allows you to store or retrieve messages in a data store. You can use the Write operation to store a static payload in a data store entry with a specified key. A Content Modifier component allows you to modify the message content, headers, and properties. You can use the Message Body tab to define a static payload for the message. Reference: Modernize Integration with SAP Integration Suite | openSAP

NEW QUESTION # 44
What are the maturity levels of the SAP Integration Solution Advisory Method-ology? Note: There are 2 answers to this question.

• A. Enable your integration structure.
• B. Implement your integration architectural strategy.
• C. Design your hybrid integration platform.
• D. Assess your integration strategy

Answer: C,D

Explanation:
The maturity levels of the SAP Integration Solution Advisory Methodology are as follows:
Assess your integration strategy. This level helps you evaluate your current integration landscape and identify the gaps and challenges that need to be addressed.
Design your hybrid integration platform. This level helps you define your target integration architecture and select the best-fit integration technologies and tools for your scenarios.
Implement your integration architectural strategy. This level helps you execute your integration projects and deliver value to your business.
Enable your integration structure. This level helps you establish a governance model and best practices for your integration operations and maintenance. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP

NEW QUESTION # 45
When does the "Trace" log level expire and when will the log files be re-moved?

• A. Expiration. 10 minutes Removal. After 24 hours
• B. Expiration: 15 minutes Removal: After 10 hours
• C. Expiration: 15 minutes Removal: After 24 hours
• D. Expiration: 10 minutes Removal: After 1 hour

Answer: D

Explanation:
The "Trace" log level expires after 10 minutes and the log files are removed after 1 hour. The "Trace" log level is the most detailed log level that can be set for an integration flow. It records all the information about the message processing, such as headers, properties, payloads, attachments, and exceptions. However, it also consumes more resources and storage space than other log levels. Therefore, it is recommended to use it only for troubleshooting purposes and for a short duration. The "Trace" log level can be activated from the Monitor Message Processing view or from the integration flow editor. Reference: Log Levels | SAP Help Portal, Activating Trace Log Level | SAP Help Portal

NEW QUESTION # 46
......

SAP C_CPI_2404 Exam Syllabus Topics:

Topic	Details
Topic 1	Managing Cloud Integration: In this topic, you encounter questions about log levels, integration flows, Content modifier, and Apache Camel Data Model. Moreover, it delves into SOAP adapters.
Topic 2	Modeling Processes: This topic explains Cloud integration capability in SAP Integration Suite usage, XSLT mapping, and HTTP calls. It also discusses troubleshooting content modifier and integration flows. Lastly, it delves into configuring SOAP adapter for asynchronous processing.
Topic 3	Introducing iPaaS: It focuses on SAP Integration Solution Advisory Methodology (ISA-M), SAP Business Accelerator Hub usage, and (SAP) open integration. Lastly, sub-topics related to holistic integration are also included.
Topic 4	SAP Integration Suite Overview: This topic discusses key elements of SAP BTP, capabilities of SAP Integration Suite, API-related concepts, usage of OData, and API proxy.
Topic 5	Managing APIs: It focuses on explaining API target endpoints, the API management capability of SAP Integration Suite, API business hub enterprise usage, message protocols, and onboarding. Moreover, it discusses creating API providers and setting up authentication policies.

 

Validate your C_CPI_2404 Exam Preparation with C_CPI_2404 Practice Test: https://www.actual4labs.com/SAP/C_CPI_2404-actual-exam-dumps.html