[Apr-2024] Exam NS0-162: New Brain Dump Professional - Actual4Labs
Free NS0-162 Exam Dumps to Improve Exam Score
NEW QUESTION # 45
You have a new ONTAP 9.7 2-node AFF A300 cluster with 2x DS224C full shelves of 3.8 TB encrypted SSDs.
In this scenario, which statement matches the factory disk-ownership setting?
- A. Drives 0-11 on each shelf are assigned to one node, and drives 12-23 on each shelf are assigned to the partner node.
- B. All even-numbered drives on each shelf are assigned to one node, and all odd-numbered drives on each shelf are assigned to the partner node.
- C. All drives on shelf 1 are assigned to one node, and all drives on shelf 2 are assigned to the partner node.
- D. Disk ownership is not assigned by the factory,
Answer: A
NEW QUESTION # 46
Exhibit.
You have received an alert from Active IQ Unified Manager that interface eOc has gone offline. Network engineering asks for the corresponding MAC address for the port that has a problem.
Referring to the exhibit, which MAC address would you supply to the engineering team?
- A. 02:a0:98:fl:21:88
- B. 00:a0:98:fl:2e:b2
- C. 02:a0:98:fl:2e:be
- D. 00:a0:98:fl:2e:b3
Answer: B
Explanation:
Explanation
To find the MAC address of the offline interface e0c, you need to look at the output of the network port show command for Node1, which shows the MAC address and the health status of each port. The MAC address of e0c is 00:a0:98:f1:2e:b2 and its health status is degraded, indicating that it has gone offline. This is the MAC address that you would supply to the engineering team.
The other MAC addresses are not correct, as they belong to different interfaces or nodes. The MAC address of e0d is 00:a0:98:f1:2e:b3 and its health status is healthy, indicating that it is still online. The MAC address of a0a is 02:a0:98:f1:2e:be and it is the active MAC address of the ifgrp that includes e0c and e0d. The MAC address of ala is 02:a0:98:f1:21:88 and it is the active MAC address of the ifgrp on Node2, which is not relevant to the question. References :- network port show - NetApp, network interface show - NetApp, How does a VIF MAC address get assigned in ONTAP 7?.
NEW QUESTION # 47
When deploying NVMe/FC, what must be supported and enabled on the host to ensure proper multipathing?
- A. Asynchronous Namespace Access (ANA)
- B. NVMe Qualified Names (NQN)
- C. Asymmetric Logical Unit Access (ALUA)
- D. single initiator multiple target zoning
Answer: A
NEW QUESTION # 48
You want to add SSDs to existing HDD aggregates.
Which NetApp tool helps you to validate how many SSDs would Improve performance?
- A. Active IQ Unified Manager
- B. Automated Workload Analyzer
- C. OnCommand Workflow Automation
- D. ONTAP System Manager
Answer: B
Explanation:
Explanation
To add SSDs to existing HDD aggregates, you need to use the Automated Workload Analyzer (AWA) tool, which is a part of the Active IQ Performance Analytics service. AWA can help you to validate how many SSDs would improve performance by analyzing the workload characteristics and performance metrics of your cluster and providing recommendations for optimal SSD allocation. AWA can also help you to identify the best candidates for Flash Pool conversion, which is a feature that allows you to combine SSDs and HDDs in the same aggregate to improve performance and efficiency12.
OnCommand Workflow Automation is not the tool that can help you to validate how many SSDs would improve performance, as it is mainly used for automating storage management tasks and workflows3.
Active IQ Unified Manager is not the tool that can help you to validate how many SSDs would improve performance, as it is mainly used for monitoring and managing the health, performance, and configuration of the cluster, not the SSD allocation4.
ONTAP System Manager is not the tool that can help you to validate how many SSDs would improve performance, as it is mainly used for performing basic administration and management tasks on the cluster, not the SSD optimization5. References :- Active IQ Performance Analytics, Flash Pool overview, OnCommand Workflow Automation overview, Active IQ Unified Manager overview, ONTAP System Manager overview.
NEW QUESTION # 49
You have a 50 TO FlexGroup volume that is serving NFSv3 on a FAS8300 HA pair that Is running ONTAP 9.8 software of files. A Linux du command runs for days to count files.
In this scenario, which native ONTAP feature will report real-time file counts?
- A. Logical Space Reporting
- B. File System Analytics
- C. volume autosize
- D. Quality of Service
Answer: C
NEW QUESTION # 50
Exhibit
You have a 2-node FAS8300 switchless cluster. You ran the performance capacity report to see the last hour of performance
Referring to the exhibit, which two statements describe the performance? (Choose two.)
- A. The CPU has been over utilized.
- B. A storage failover event will cause performance issues.
- C. The CPU has been underutilized.
- D. A storage failover event will have no performance degradation.
Answer: A,B
NEW QUESTION # 51
When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true? (Choose two.)
- A. The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site.
- B. The latest available Images will appear In the ONTAP System Manager interface.
- C. The Images must be manually uploaded to the cluster by using the ONTAP System Manager interface.
- D. The update history is available within the ONTAP System Manager interface.
Answer: B,C
NEW QUESTION # 52
Click the Exhibit button.
Referring to the exhibit, which volume has a snap reserve value set to zero (0)?
- A. netapp_esx
- B. netapp_n01
- C. netapp_esx_m1
- D. netapp_Inx_m1
Answer: D
NEW QUESTION # 53
You ate attempting to establish a SnapMlrror relationship between your ONTAP cluster (AcmeClusOl) and a partner company's ONTAP cluster (WidgetsClusOl). The clusters are unable to establish a peering relationship. You perform a packet capture on WldgetsClusOl and do not see any packets from AcmeClusOl. You also discover that the IP subnet that Is used for WidgetsClusOl's intercluster LIFs overlaps with a local subnet at your company.
In this scenario, which feature would enable AcmeClusOl and WidgetsClusOl to peer with each other?
- A. IPspaces
- B. VLANs
- C. broadcast domains
- D. ONTAP subnets
Answer: A
Explanation:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Protection_and_Security/SnapMirror/How_to_create_and_configure_Cluster_Peering_with_designated_InterCluster_LIFs_using_IPSpaces
NEW QUESTION # 54
Exhibit.
After an ONTAP upgrade, you notice that several cluster LIFs are not on their home ports as shown in the exhibit.
Which LIF option would change this outcome?
- A. the data-protocol option
- B. the auto-revert option
- C. the failover-policy option
- D. the subnet-name option
Answer: A
NEW QUESTION # 55
Your company has recently decided to stop using the Fibre Channel Protocol (FCP) in the data center.
You are asked to decommission FCP and reuse any UTA2 ports to 10 GbE.
Which two steps are involved in this task? (Choose two.)
- A. Reboot the nodes.
- B. License additional ports for 10 GbE connectivity.
- C. Destroy any FC LIFs hosted on UTA2 ports.
- D. Remove the FCP license from all nodes in the cluster.
Answer: A,C
NEW QUESTION # 56
You are asked to deploy a 2-node ONTAP Select cluster. The physical hardware Is located In two different locations and you want the aggregates mirrored synchronously between the two data centers. You must ensure high availability and automated switchover. In this scenario, which two steps would you take to fulfill this requirement? (Choose two.)
- A. Ensure that the ONTAP Select Deploy VM resides at a third location other than the two data centers.
- B. Use ONTAP Mediator service to make sure that you have a quorum for the two nodes.
- C. Use ONTAP Select Deploy to Install the nodes on the physical hardware.
- D. Install the SnapMirror Sync license on the cluster.
Answer: A,B
Explanation:
https://docs.netapp.com/us-en/ontap-select/reference_plan_ots_two_node.html
When a cluster consists of two nodes, it is not possible to achieve the quorum required when a node fails or loses communication. To resolve these types of split-brain situations, every instance of the ONTAP Select Deploy utility includes a mediator service. If you have one or more active two-node clusters, the ONTAP Select Deploy virtual machine administering the clusters must be running at all times.
NEW QUESTION # 57
When you set up an ONTAP cluster, which two SVM types are automatically created? (Choose two.)
- A. admin
- B. node
- C. data
- D. cluster
Answer: B,C
NEW QUESTION # 58
Your company requests that the monthly performance data of your ONTAP 9.8 cluster be exported to a CSV file for further processing. In this scenario, which three NetApp products satisfy this requirement? (Choose three.)
- A. ONTAP System Manager
- B. Active IQ Unified Manager
- C. Cloud Insights
- D. Active IQ Config Advisor
- E. Active IQ OneCollect
Answer: A,C,E
NEW QUESTION # 59
You need to configure data-at-rest encryption for your NetApp ONTAP 9.8 cluster. Your company does not have Key Management Interoperability Protocol (KMIP) services available but must require a passphrase to be entered when a node Is rebooted.
In this scenario, which two actions should be performed to satisfy these requirements? (Choose two.)
- A. Enable common criteria mode.
- B. Configure an external key management server.
- C. Enable onboard key management.
- D. Enable cluster-wide FlPS-compliant mode.
Answer: C,D
Explanation:
Explanation
To configure data-at-rest encryption for your NetApp ONTAP 9.8 cluster without KMIP services, you need to enable onboard key management and cluster-wide FIPS-compliant mode. Onboard key management allows you to use a passphrase to generate and protect the cluster-wide encryption key, which is used to encrypt the disk encryption keys. Cluster-wide FIPS-compliant mode ensures that the encryption algorithms and modules used by ONTAP are compliant with the Federal Information Processing Standard (FIPS) 140-2. These two actions will satisfy the requirements of data security and passphrase protection for your cluster. References
:- NetApp Encryption overview, Configure onboard key management, Enable cluster-wide FIPS-compliant mode
NEW QUESTION # 60
You are performing an ONTAP upgrade with an intercluster data protection SnapMirror relationship in this scenario, which two steps must be performed before an NDU? (Choose two.)
- A. SnapMirror operations must be suspended.
- B. The source cluster must be upgraded first.
- C. SnapMirror operations must be broken.
- D. The destination cluster must be upgraded first.
Answer: A,D
NEW QUESTION # 61
You have commissioned a new AFF A250 MetroCluster over IP configuration. Your company requires an automatic switchover to the surviving site In case of a site disaster.
What do you need to configure to fulfill this requirement?
- A. ONTAP Mediator service
- B. automated unplanned switchover
- C. cluster failover
- D. storage failover
Answer: A
Explanation:
Reference:
Starting with ONTAP 9.7, the ONTAP Mediator service can assist the MetroCluster IP configuration in performing an automatic unplanned switchover by providing a physically separate repository for status information.
NEW QUESTION # 62
Which three protocols are supported by NetApp ONTAP Select? (Choose three.)
- A. SCSI
- B. NFS
- C. NVMe
- D. CIFS
- E. FCP
Answer: A,B,D
NEW QUESTION # 63
You need to configure data-at-rest encryption for your NetApp ONTAP 9.8 cluster. Your company does not have Key Management Interoperability Protocol (KMIP) services available but must require a passphrase to be entered when a node Is rebooted.
In this scenario, which two actions should be performed to satisfy these requirements? (Choose two.)
- A. Enable cluster-wide FlPS-compliant mode.
- B. Enable common criteria mode.
- C. Configure an external key management server.
- D. Enable onboard key management.
Answer: B,D
Explanation:
Enabling onboard key management by default you are not required to enter a passphrase when the node is rebooted. To be asked the password , you need to enable the common criteria mode also.
NEW QUESTION # 64
......
Candidates who pass the NS0-162 exam will have a thorough understanding of NetApp ONTAP software and its features, including data protection, high availability, and storage efficiency. They will also have the skills necessary to perform essential administrative tasks such as configuring and managing NetApp storage systems, troubleshooting common issues, and implementing best practices for data management. With this certification, IT professionals can demonstrate their expertise in NetApp data management solutions, making them more marketable and valuable to employers in the industry.
Powerful NS0-162 PDF Dumps for NS0-162 Questions: https://www.actual4labs.com/NetworkAppliance/NS0-162-actual-exam-dumps.html
2024 Realistic NS0-162 Dumps Exam Tips Test Pdf Exam Material: https://drive.google.com/open?id=136F83KipJe0SYq_JNWIl5U92GWdoSvmh