C-IBP-2105 Pre-Exam Practice Tests | (Updated 82 Questions)
Valid C-IBP-2105 Exam Q&A PDF - One Year Free Update
NEW QUESTION 37
Time profiles are made out of levels, which are in turn made out of periods. What are the ways SAP IBP identifies profiles and periods?
- A. Both periods and profiles are identified by an integer.
- B. Periods are identified by an alphanumeric prefix and profiles by an integer.
- C. Periods are identified by a start and end date and profiles by an integer.
- D. Periods are identified by an integer and profiles by an alphanumeric prefix.
Answer: C
NEW QUESTION 38
Which of the following functional areas are included in the out-of-the-box SAP Integrated Business Planning application for sales and operations? Note: There are 3 correct Answers to this question.
- A. Executive review
- B. Finite resource capacities planning
- C. Demand-driven materials requirement planning
- D. Rough-cut supply planning
- E. Consensus demand planning
Answer: A,D,E
NEW QUESTION 39
Which of the following is one of the functions of multi-echelon inventory optimization?
- A. Ability to optimize delivery costs between different locations
- B. Ability to optimize lead times between different locations
- C. Ability to maintain high external service levels with low internal service levels
- D. Ability to maintain high external service levels with high internal service levels
Answer: C
NEW QUESTION 40
Which of the following configuration options are part of the new key figure creation process? Note:
There are 3 correct Answers to this question.
- A. Hiding or displaying totals for the key figure
- B. Setting permitted planning levels
- C. Setting disaggregation logic for the key figure
- D. Enabling planning notes for the key figure
- E. Enabling fixing for the key figure
Answer: C,D,E
NEW QUESTION 41
You want to set up demand sensing to analyze demand changes in execution or close to execution windows. Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.
- A. It is mandatory to load historical lag-based snapshot data.
- B. Set up the forecast model to be executed at product-location level.
- C. At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.
- D. The result generates sensed demand data at the monthly time granularity for the full time horizon.
Answer: A,C
NEW QUESTION 42
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process?
Note: There are 2 correct Answers to this question.
- A. Splitting the values from aggregated to detailed level based on time profile attribute
- B. Splitting the values from aggregated to detailed level based on stored split-factor key figure
- C. Splitting the values from aggregated to detailed level using multiplication by the proportions
- D. Splitting the values from detailed to aggregated level by using copy operator
Answer: B,C
NEW QUESTION 43
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.
- A. Rename the charts.
- B. Add process templates.
- C. Link two analytics charts.
- D. Organize charts.
- E. Display all assigned analytics on a single UI.
Answer: B,D,E
NEW QUESTION 44
Which header name displays are available in the Report Options menu of the SAP IBP Excel interface?
Note: There are 2 correct Answers to this question.
- A. Full unique name including the dimension and technical name
- B. Caption, as defined in configuration for the default name
- C. Business meaning, as defined in configuration
- D. Changed member names that the user had created
Answer: A,C
NEW QUESTION 45
What function would you use to configure a year-to-date calculation?
- A. Dynamic Rolling Aggregation
- B. Last Period Aggregation
- C. Cumulative Aggregation
- D. Rolling Aggregation
Answer: C
NEW QUESTION 46
Which conditions are prerequisites for key figure disaggregation?
- A. The key figure is calculated and editable.
- B. The key figure is stored and editable.
- C. The key figure is set to Not Editable.
- D. The key figure is calculated and aggregation mode is selected.
Answer: B
NEW QUESTION 47
The Analytics Advanced app allows you to work with different types of charts. What can be the origin of the charts you can work with?
- A. Dashboards Advanced
- B. Custom Alerts
- C. Process Templates
- D. SAP IBP VBA Add-in template
Answer: D
NEW QUESTION 48
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using attribute as a key figure
- B. Using key figure calculation
- C. Using local member
- D. Using aggregation mode average
Answer: D
NEW QUESTION 49
You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.
What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.
- A. Specifying target key figure is mandatory.
- B. Specifying source key figure is mandatory.
- C. Specifying target key figure that is time independent is possible.
- D. Selecting by attribute with option 'contain' is possible.
Answer: A,B
NEW QUESTION 50
You are working with the inventory optimization process and you want to use a what-if analysis. What parameters are assessed by this analysis? Note: There are 2 correct Answers to this question.
- A. Number of planning combinations
- B. Service levels
- C. Changed variability
- D. Capacity consumption
Answer: B,C
NEW QUESTION 51
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.
- A. Remove an attribute assigned to the time profile level if the attribute is used in a planning level.
- B. Add a new time profile level to the time profile.
- C. Change the past and future horizon of the levels in the time profile.
- D. Change the description of the attributes in the time profile.
Answer: C,D
NEW QUESTION 52
You are reviewing the master data types for supply planning. Which master data types are compound master data types? Note: There are 2 correct Answers to this question.
- A. SOURCECUSTOMER
- B. SOURCEPRODUCTION
- C. LOCATIONFR
- D. SOURCELOCATION
Answer: A,D
NEW QUESTION 53
For which of the following application jobs can you enter planning filters as parameters? Note: There are
2 correct Answers to this question.
- A. Purge Master Data
- B. Purge Non-Conforming Data
- C. Purge Key Figure Data
- D. Create Time Periods for Time Profiles
Answer: A,C
NEW QUESTION 54
SAP is transitioning IBP customers to the new process of export/import. What are some of the features of this new process? Note: There are 2 correct Answers to this question.
- A. You can export from a planning area that is on a different release.
- B. You can choose to import only some of the items that were exported.
- C. You can create a collection of items and export it.
- D. You can move a transported item from one collection to another.
Answer: A,D
NEW QUESTION 55
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.
- A. Loc-Prod Subst Valid-From Date
- B. Promotion duration
- C. Flag 'Disable Substitution of Location Products'
- D. Location Product Sub Cost Rate
Answer: A,B
NEW QUESTION 56
You run a what-if analysis and use the scenario planning function. Which actions can you perform? Note:
There are 3 correct Answers to this question.
- A. Run a scenario-specific inventory optimization job.
- B. Run a scenario-specific demand sensing job.
- C. Display data in analytics.
- D. Change scenario-specific master data.
- E. Share data with other users.
Answer: A,C,E
NEW QUESTION 57
You have set up infinite S&OP heuristics for unconstrained planning. What must you do to model inputs as constraints? Note: There are 2 correct Answers to this question.
- A. Set minimum and maximum lot sizes.
- B. Model adjusted transport receipts.
- C. Create product substitutions.
- D. Enter transportation lead times.
Answer: B,D
NEW QUESTION 58
Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? Note: There are 2 correct Answers to this question.
- A. It should be a non-key attribute of the master data type.
- B. It belongs to a simple or compound master data type.
- C. Its data type is INTEGER and its length has been specified.
- D. The length of the attribute needs to be 18 digits.
Answer: A,B
NEW QUESTION 59
Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are
2 correct Answers to this question.
- A. An advanced demand planning process
- B. A basic demand planning process
- C. Finite resource planning
- D. Manual creation of feasible constrained plans
Answer: B,C
NEW QUESTION 60
Which of the following are functions of SAP IBP for demand? Note: There are 3 correct Answers to this question.
- A. Embedded, on-the-fly demand analytics
- B. Detailed statistical analysis of demand data using predictive analytics tools
- C. Demand sensing of demand data using the supply chain algorithm library
- D. Detailed statistical analysis of demand data using the supply chain algorithm library
- E. Demand sensing of demand data using predictive analytics tools
Answer: A,B,C
NEW QUESTION 61
......
SAP Certified Application Associate - SAP Integrated Business Planning Free Update Certification Sample Questions: https://www.actual4labs.com/SAP/C-IBP-2105-actual-exam-dumps.html