Download Exam S1000-007 Practice Test Questions with 100% Verified Answers
Share Latest S1000-007Test Practice Test Questions, Exam Dumps
NEW QUESTION 12
An administrator checks the IBM Fix Level Recommendation Tool (FLRT) for their system to see if they need to update IBM firmware or software.
The tool asks for their current system firmware level. How can the administrator confirm what it is?
- A. run lsattr -1 firmware0
- B. run lsmcode -A
- C. run lscfg -vl sys0
- D. run lsattr -El sys0 Igrep mcode
Answer: B
Explanation:
According to the IBM AIX v7 Administrator Specialty Study Guide, the lsmcode command is used to list the microcode of the system. The -A flag is used to list the microcode level and the active microcode level of the system. This command can be used to confirm the system firmware level which is required to use the IBM Fix Level Recommendation Tool (FLRT).
NEW QUESTION 13
What is the effect of running the mount -a command?
- A. All automatic file systems are mounted.
- B. All JFS/JFS2 file systems are mounted.
- C. All file systems defined to the system are mounted
- D. Ail file systems set to mount=true are mounted.
Answer: C
Explanation:
This command is used to mount all file systems defined in the /etc/filesystems file, as well as any file systems that have the mount=true attribute set in the /etc/filesystems file. According to the IBM AIX v7 Administrator Specialty Study Guide, "the mount -a command mounts all file systems specified in the /etc/filesystems file, including file systems with the mount=true parameter set. The mount -a command is normally issued at system startup or when a new file system is added to the system."
NEW QUESTION 14
A customer calls to complain about slow workload performance but offers no additional details. What should the administrator do next?
- A. Ask the caller for additional details.
- B. Add 10% more memory by DLPAR operation
- C. Increase CPU entitlement by 10%
- D. Add two more virtual CPUs by DLPAR operation.
Answer: B
NEW QUESTION 15
An administrator starts an AIX LPAR and wants to monitor the boot process using the HMC console.
Which command in HMC SSH session lists all managed systems, LPARs on them and offers an easy way to open a console window to an AIX LPAR?
- A. lsrefcode
- B. vtmenu
- C. mkvterm
- D. lssyscfg
Answer: C
NEW QUESTION 16
An AIX system is defined as a NIM client with -a connect=shell. The client system is up and running. The client can ping the NIM master, and the master can ping the client. The administrator of the NIM master system attempts to use NIM to install software updates on the NIM client, but receives the error message Permission denied.
What can the administrator of the AIX NIM client do to help resolve the problem?
- A. Check that the root user's .rhosts file has an entry for the NIM master, and that the file permissions are
600. - B. Flush the arp cache and then reboot the client system to ensure the network route table is correct.
- C. Edit the /etc/services file to check the port number used for the nimreg service, then refresh inetd.
- D. Check the firewall configuration and open port 1066 if required.
Answer: C
NEW QUESTION 17
When a user logs in. the processing of their .profile is very slow. Which issue could contribute to the problem?
- A. The user's home file system is full.
- B. The PATH variable contains non-existent directories.
- C. A slow NFS mount for their home directory.
- D. Network issues between the user location and the system.
Answer: A
NEW QUESTION 18
A customer added paging space and needs to activate it automatically after the next reboot. Which command should the administrator issue?
- A. swapon
- B. mkps
- C. chps
- D. mklv
Answer: B
Explanation:
The mkps command creates a paging space and activates it when the system is rebooted. This is explained in the IBM AIX v7 Administrator Specialty Study Guide, under the topic "Creating and Activating a Paging Space".
NEW QUESTION 19
What command is used to monitor SAN I/O performance/throughput?
- A. mpstat -w 1
- B. vmstat -i 1
- C. ioo -L
- D. iostat -DIRT 60 10
Answer: D
NEW QUESTION 20
What AIX feature will allow data to be mirrored to a remote site?
- A. Asynchronous Dispersed Logical Volumes
- B. Geographic Logical Volume Manager
- C. Mirror Pools
- D. Remote Volume Groups
Answer: B
NEW QUESTION 21
An administrator finds that their development server has crashed and an error code 554 is displayed. They know that this error is typically associated with a problem executing varyon rootvg and they should boot from AIX Media to be able to perform maintenance tasks. When the administrator checks the crontab of the NIM server, they find that a mksysb image is created each night.
Can the administrator use this mlcsysb to boot the server and perform the required maintenance tasks?
- A. No, because mksysb is not bootable.
- B. Yes, but they may need to create a spot first.
- C. Yes, but they may need to create a machine resource first.
- D. No, because they need to use the original AIX installation media for that server.
Answer: C
Explanation:
A mksysb image is a snapshot of the AIX operating system and its configuration, so it can be used to boot the server and perform the required maintenance tasks. However, in order to use the mksysb image, the administrator may need to create a machine resource in the NIM environment first. According to the IBM AIX v7 Administrator Specialty Study Guide (page 13-6), the mksysb image should be used in combination with a previously created machine resource, which defines the parameters for the installation.
NEW QUESTION 22
A SAN administrator increased the size of a LUN device (hdisk) that is being used by a AIX LPAR. However, the system administrator does not see the new size using the lsvg or Ispv commands.
Which command updates the system with the new size?
- A. cfgmgr
- B. extendpv
- C. chvg -g
- D. synclvodm
Answer: A
Explanation:
The cfgmgr command updates the system configuration database with the current configuration of the devices attached to the system. When the SAN administrator increases the size of a LUN device (hdisk), it is not automatically reflected on the AIX LPAR. Running the cfgmgr command updates the system with the new size information and makes it visible to the system administrator.
NEW QUESTION 23
An AIX administrator installed the fileset named useful_fileset. How can they determine which files are included in the fileset?
- A. file -f useful__fileset
- B. lslpp -f useful_fileset
- C. rpm -qf useful_fileset
- D. lppchk -f useful fileset
Answer: B
Explanation:
The "lslpp" command can be used to display information about filesets installed on an AIX system. To determine which files are included in the "useful_fileset" fileset, the administrator can run the following command:
lslpp -f useful_fileset
This command will display detailed information about the "useful_fileset" fileset, including a list of the files that are included in the fileset. This information can be useful for verifying the installation of the fileset and for troubleshooting problems that may be related to the fileset.
NEW QUESTION 24
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?
- A. mJcvdev
- B. oem_setup_env
- C. mlcvterm
- D. mkrep
Answer: C
NEW QUESTION 25
Which command lists filesets that are below AIX V7.2 technology level 4?
- A. lslpp -s -1 7200-04
- B. lppchk: -L -F "fileset level" I grep -v "7200-04"
- C. oslevel -r -1 7200-04
- D. instfix -i I grep -v 7200-04
Answer: D
NEW QUESTION 26
An IT security department would like to limit root user access to only members of the group called system. Which command will accomplish this?
- A. chadmin group=system root
- B. chgroup admin=root system
- C. cruiser sugroups=system root
- D. chadmin user=root system
Answer: A
Explanation:
The "chadmin" command can be used to modify the attributes of a user account, including the groups that the user belongs to. The syntax for limiting root user access to members of the group called "system" would be:
sql
chadmin group=system root
This command will add the root user to the "system" group and remove it from any other groups. Members of the "system" group will be the only ones able to access the root account.
NEW QUESTION 27
Which command should be used to perform a graceful shutdown and reboot of an AIX LPAR?
- A. shutdown
- B. halt
- C. reboot
- D. bosboot
Answer: A
Explanation:
The shutdown command is used to shut down a system in an orderly manner. When used with the '-Fr' option, it will perform a graceful shutdown and reboot of the LPAR. This command is available on IBM AIX v7 systems and is documented in the IBM AIX v7 Administrator Specialty Study Guide. The syntax for the command is "shutdown -Fr", where the '-F' option indicates that the system should be rebooted after shutdown and the '-r' option indicates that the system should be rebooted. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds3/shutdown.htm.
NEW QUESTION 28
......
IBM S1000-007 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Positive Aspects of Valid Dumps S1000-007 Exam Dumps!: https://www.actual4labs.com/IBM/S1000-007-actual-exam-dumps.html
First Attempt Guaranteed Success in S1000-007 Exam: https://drive.google.com/open?id=1vZOpgw5qlQMUn6cHfJrxiX9pZS1Mwtc6