Guaranteed Success in HPE Product Certified - OneView [2022] HPE2-T37 Exam Dumps
HP HPE2-T37 Daily Practice Exam New 2024 Updated 98 Questions
NEW QUESTION # 16
You need to make sure that server ports connected to this network cannot communicate with each other within the logical interconnect. Click the option within the network definition that will allow you to configure the required parameter.
Answer:
Explanation:
NEW QUESTION # 17
You are deploying HPE OneView to manage a customer's HPE ProLiant servers Is this statement about appliance availability true?
- A. HA features for HPE OneView are enabled only if the appliance is deployed on an HPE SimpliVity cluster
- B. HPE OneView availability relies on HA features provoed by the hypervisor
- C. During hpe oneView deployment customer may select configure proprietary HA mode.
- D. HPE OneView has a built-in HA feature that can be activated with an additional license
Answer: B
NEW QUESTION # 18
You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?
- A. The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.
- B. The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.
- C. Ensure that the Link Aggregation Group time-out value matches the server set values.
- D. Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.
Answer: B
NEW QUESTION # 19
What is the best practice when deploying an HPE OneView appliance?
- A. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
- B. Deploy two HPE OneView appliances and configure them in HA mode.
- C. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
- D. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
Answer: D
NEW QUESTION # 20
You originally configured boot mode for HPE ProLiant Gen10 server to 'Legacy BIOS' in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the 'UEFI optimized' to leverage some features provided by this mode.
What must you do next?
- A. reset BIOS settings to the defaults through the server profile after changing the boot mode
- B. reinstall an operating system, as UEFI is using different drive format than Legacy BIOS
- C. reset BIOS settings to the defaults so UEFI settings can be applied
- D. reset an il_0 management processor to activate the new boot mode for the server
Answer: D
NEW QUESTION # 21
You originally configured boot mode for HPE ProLiant Gen10 server to 'Legacy BIOS' in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the 'UEFI optimized' to leverage some features provided by this mode.
What must you do next?
- A. reset BIOS settings to the defaults through the server profile after changing the boot mode
- B. reset an il_0 management processor to activate the new boot mode for the server
- C. reset BIOS settings to the defaults so UEFI settings can be applied
- D. reinstall an operating system, as UEFI is using different drive format than Legacy BIOS
Answer: D
NEW QUESTION # 22
To increase security, your customer wants to enable Secure Boot for HPE Synergy 480 Gen10 Compute Modules.
Which boot mode option should be configured in a server profile to enable required option?
- A. UEFI optimized
- B. Legacy BIOS
- C. EFI
- D. UEFI
Answer: D
NEW QUESTION # 23
What is a network set?
- A. It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.
- B. It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.
- C. It is a collection of all networks configured within HPE OneView regardless of network type.
- D. It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.
Answer: D
NEW QUESTION # 24
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution.
How can an IPv4 address pool defined by the administrator be used In HPE OneView?
- A. to provide static IP addresses for an operating system running on a Compute Module
- B. to provide static IP addresses to IL0 and interconnect modules if applicable
- C. to provide static IP addresses for Logical Interconnects and Logical Enclosures
- D. to provide static IP addresses for storage systems managed in HPE OneView
Answer: B
NEW QUESTION # 25
Which firmware activation method is only available for a logical interconnect?
- A. Parallel
- B. Force installation
- C. Manual orchestration
- D. Orchestration
Answer: C
NEW QUESTION # 26
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile.
What is a likely cause of this situation?
- A. The other networks are not configured with the required Smart Link parameter.
- B. The other networks have Private Network' selected, which hides them from ComputeModules.
- C. The other networks are configured with a purpose other than General or Management.
- D. The other networks are not added to the Logical Interconnect Group configuration.
Answer: D
NEW QUESTION # 27
What event occurs on iLO when an HPE ProLiant server is added to HPE OneView?
- A. IPMI credentials are configured for the iLO
- B. Active Directory configuration is performed on iLO
- C. SSO certificate is added to the iLO
- D. REST API plugin is enabled for iLO
Answer: D
NEW QUESTION # 28
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
Answer:
Explanation:
NEW QUESTION # 29
Refer to the exhibit.
What does selecting the "Permanent" option mean?
- A. Any write operation to the logical JBOD will be immediately written, bypassing the cache.
- B. To remove data from the logical JBOD, the "erase on delete" option must be selected.
- C. The logical JBOD will not be deleted, even when server profile is deleted.
- D. Deleting the logical JBOD is possible only from the CLI with Administrator privileges.
Answer: C
NEW QUESTION # 30
DRAG DROP
For each feature. indicate whether it is available with both hpeoneview Standard and hpeoneview Advanced licenses, or only with an hpeoneview Advanced license.
Answer:
Explanation:
Explanation:
Graphical user interface, application
Description automatically generated
NEW QUESTION # 31
Which action is allowed on storage pools managed by HPE OneView?
- A. Changing storage pool capacity
- B. Volume provisioning
- C. Setting storage pool replication
- D. Changing storage pool RAID level
Answer: B
NEW QUESTION # 32
......
Test Engine to Practice HPE2-T37 Test Questions: https://www.actual4labs.com/HP/HPE2-T37-actual-exam-dumps.html
Use Valid HPE2-T37 Exam - Actual Exam Question & Answer: https://drive.google.com/open?id=1RhxICJ-6QJXBnCn3ovL4vrfL2koQeo56