HPE6-A72 Dumps Special Discount for limited time Try FOR FREE
HPE6-A72 Dumps for success in Actual Exam Aug-2024]
NEW QUESTION # 21
Which statement is true regarding modern switching requirements?
- A. Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today's power-over-Ethernet needs.
- B. Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of IoT devices that require security and port authentication options.
- C. While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.
- D. Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for IoT devices are usually addressed using default wired encryption that all 802.3 Ethernet switches provide.
Answer: B
NEW QUESTION # 22
What are two features in a 2-Tier design that are implemented at the Access layer? (Choose two.)
- A. VPN access
- B. WAN/MPLS connectivity
- C. Deep packet inspection
- D. Endpoint Access
- E. Power over Ethernet
Answer: D,E
NEW QUESTION # 23
Which two statements accurately describe stacking with Aruba switches? (Choose two.)
- A. A VSF stack is allowed between an AOS-CX 6300M and 6300F switches.
- B. The VSF feature is not compatible between AOS-CX and AOS platforms.
- C. VSF and VSX are stacking option with the AOS-CX 8320. 8325. 8400. and 6400 models.
- D. VSF is a core or aggregation layer stacking technology due to the high resiliency of sharing a single control plane.
- E. A VSF stack is allowed between an AOS 5400R and an AOS-CX 6400.
Answer: C,D
NEW QUESTION # 24
Your customer has 349 users in a two-story building.
What are two benefits of a 2-Tier design? (Choose two.)
- A. Layer 2 and Layer 3 protocols run close to the endpoints to better implement ACL and QoS policy at the edge.
- B. Use of layer 2 switches at the access layer can process and route traffic from attached APs.
- C. Improved performance by offloading processing from the Access layer to the Core.
- D. Provides a more cost effective solution given that no additional switches are required for a third tier.
- E. Support for WAN/MPLS, Internet, and Data Center directly on the Collapsed core.
Answer: A,D
NEW QUESTION # 25
Interface 1/1/1 is up
Admin state is up
Link transitions: 1
Description: TO_PC-1
Hardware: Ethernet, MAC Address: 00:11:22:33:44:55
MTU 1500
Type 1GbT
Full-duplex
qos trust none
Speed 1000 Mb/s
Auto-negotiation is on
Flow-control: off
Error-control: off
MDI mode: MDIX
VLAN Mode: access
Access VLAN: 1111
Which command will produce the above output?
- A. show interface gigabit 1/1/1
- B. show interface 1/1/1
- C. show interface vlan 1111
- D. show vlan 1111
Answer: B
NEW QUESTION # 26
Match each description to the correct term.
Answer:
Explanation:
NEW QUESTION # 27
Refer to the exhibit.
The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION # 28
What is the binary conversion of the hexadecimal value 0x2001?
- A. 0010 0001
- B. 0002 0000 0000 0001
- C. 0010 0000 0000 0001
- D. 0011 0000 0000 0001
Answer: C
NEW QUESTION # 29
What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?
- A. copy secondary tftp://[email protected]/GL.10.04.0003.swi
- B. backup secondary sftp://[email protected]/GL.10.04.0003.swi
- C. copy secondary sftp://[email protected]/GL.10.04.0003.swi
- D. copy sftp://[email protected]/GL.10.04.0003.swi secondary
Answer: C
NEW QUESTION # 30
Which two options are the Layer 3 Routing protocols? (Choose two.)
- A. BGP
- B. LLDP
- C. MPLS
- D. OSPF
- E. 802.3ad
Answer: A,D
NEW QUESTION # 31
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)
- A. operates in both the 2.4GHz and 5GHz radios bands
- B. allows transmissions of up to 4.8Gbps
- C. is an emerging satellite connection standard to allow wireless access anywhere in the world
- D. operates only in the 5GHz similar to 802.11ac
- E. is the first WLAN standard to no longer use electromagnetic signals to transmit data
Answer: A,B
NEW QUESTION # 32
The section in blue can be ignored.
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION # 33
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command inventory
- B. The command show system
- C. The command show running-configuration
- D. The command version
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION # 34
Refer to the exhibit.
Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?
- A. 0
- B. 1
- C. 01001011
- D. 2
Answer: A
NEW QUESTION # 35
Refer to the exhibit.
What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface?
- A. Use the command ping 10.1.1.254/24
- B. The destination 10.1.1.254 requires configuring a static route
- C. Change the Core-1 management address to 10.1.1.1/25 first
- D. Use the command ping 10.1.1.254 vrf mgmt
Answer: D
NEW QUESTION # 36
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
- B. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
- C. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
- D. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
Answer: A
NEW QUESTION # 37
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization. What command should be used to enable terminal output line by line or page by page?
- A. The command terminal length 30
- B. The command more
- C. The command less
- D. The command page
Answer: D
NEW QUESTION # 38
You have completed a successful VSF stack between two switches.
Without manually assigning a backup switch, what is the expected output when issuing a show vsf command?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION # 39
Refer to the exhibit.
What VSF command produces the above output?
- A. show vsf member
- B. show vsf topology
- C. show vsf link
- D. show vsf detail
Answer: B
NEW QUESTION # 40
What are the commands to disable SSH and HTTPS services from the default VRF?
- A. Core-1(config)# no ssh server vrf default
Core-1(config)# no https-server vrf default - B. Core-1(config)# no ssh server
Core-1(config)# no https-server - C. Core-1# no ssh server vrf default
Core-1# no https-server vrf default - D. Core-1(config)# no ssh server enable
Core-1(config)# no https-server enable
Answer: A
NEW QUESTION # 41
Match each description to the correct management tool for Aruba AOS-CX.
Answer:
Explanation:
NEW QUESTION # 42
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 - D. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: D
Explanation:
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
NEW QUESTION # 43
Refer to the exhibit.
What is the correct binary conversion of the last two hexadecimal characters of the physical address?
- A. 1000 1101 1110 1101
- B. 1001 1111 0101 0011
- C. 1101 1000
- D. 1110 1101
Answer: D
NEW QUESTION # 44
......
Accurate HPE6-A72 Answers 365 Days Free Updates: https://www.actual4labs.com/HP/HPE6-A72-actual-exam-dumps.html
Realistic HPE6-A72 100% Pass Guaranteed Download Exam Q&A: https://drive.google.com/open?id=1s3qEvViYd0FNY9--gbyzReOjmlbuXk0s