Oct-2021 Latest Actual4Labs H35-910-ENU Exam Dumps with PDF and Exam Engine Free Updated Today!
Following are some new H35-910-ENU Real Exam Questions!
NEW QUESTION 139
Which of the following is the correct explanation of the insulation protection of the cabinet?
- A. Since the cabinet grounding system is grounded, no insulation protection is required.
- B. After the cabinet is installed, the resistance of the base and expansion bolts should be less than 0.5 megohms.
- C. After the cabinet is installed, the resistance of the base and expansion bolts should be greater than 5 megohms.
- D. After the cabinet is installed, the resistance of the base and expansion bolts should be greater than 30 megohms.
Answer: C
NEW QUESTION 140
iSOP does not support video playback.
- A. False
- B. True
Answer: A
NEW QUESTION 141
Work safety needs to consider which items are included in the local weather? (Multiple choice)
- A. Frequency of snow/ice/rain, etc.
- B. Humidity
- C. Temperature and temperature changes
- D. Wind speed
Answer: A,B,C,D
NEW QUESTION 142
How many inputs and outputs does DCDU-12B provide?
- A. 2 inputs, 10 outputs
- B. 2 inputs, 5 outputs
- C. 1 input, 10 outputs
- D. 1 input, 5 outputs
Answer: A
NEW QUESTION 143
If you are sitting in the back seat of the car, there is no need to wear a seat belt.
- A. False
- B. True
Answer: A
NEW QUESTION 144
Which line connection does the RRU (Radio Range Remote Unit) and the external RCU use?
- A. RG-8U
- B. AISG multi-core cable
- C. Pigtail
- D. RF jumper
Answer: B
NEW QUESTION 145
Which is the most important purpose of wearing safety shoes when climbing a tower?
- A. Sun protection
- B. Anti-foot
- C. Anti-skid
- D. Flood prevention
Answer: C
NEW QUESTION 146
Which is the length of time that most countries prohibit fatigue driving?
- A. Driving continuously exceeded 4 hours
- B. As long as the individual feels not tired, there is no driving time limit
- C. Driving continuously exceeded 2 hours
- D. Driving continuously exceeded 6 hours
Answer: A
NEW QUESTION 147
What is the minimum number of cables connected to the RRU? (The power cable is 1)
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 148
The operation of the current network must pass the technical approval, program approval, and customer approval, and obtain the "three approvals" before the operation can be performed.
- A. False
- B. True
Answer: A
NEW QUESTION 149
What is the name of cable connecting the RRU to the antenna?
- A. 1/2 jumper
- B. Network cable
- C. 7/8 feeder
- D. Fiber
Answer: A
NEW QUESTION 150
Which of the following should be noted for the storage of goods? (Multiple choice)
- A. Floor load should meet the requirements
- B. Cannot be stored outdoors
- C. Meet the stacking limit layer number requirement
- D. Does not affect the fire exit
Answer: A,B,C,D
NEW QUESTION 151
During the installation of the antenna, which of the following links will affect the standing wave? (Multiple choice)
- A. Jumper damage is not available
- B. Jumper head bilging
- C. The connector is not tightened
- D. Waterproof is not ready
Answer: B,C,D
NEW QUESTION 152
The location of the supplier communication equipment connected to the power supply output breaker of the equipment room should be determined according to which of the following options? (Multiple choice)
- A. Design documents
- B. Connected on the large rated output terminal
- C. Customer-reserved terminals
- D. Check the available idle terminals on site
Answer: A,C
NEW QUESTION 153
Which of the following types of base stations are outdoor stations?
- A. BTS3900A
- B. BSC6900
- C. DBS3900
- D. BTS3900
Answer: A
NEW QUESTION 154
The use of a combiner can effectively save feeder resources.
- A. True
- B. False
Answer: A
NEW QUESTION 155
How many cm is the distance between the signal cable label and the connector?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 156
The inspection of the PPE only needs to be carried out at the site and does not need to be checked before departure.
- A. False
- B. True
Answer: A
NEW QUESTION 157
Which of the following protection measures is wrong?
- A. Fiber protection sleeve cuts need to be affixed with insulating tape
- B. The optical fiber must be protected. After exiting the cabinet, it is necessary to prevent stepping on it.
- C. To clarify the specifications of the fiber connector type
- D. Fiber optic connectors should be installed during RRU lifting
Answer: D
NEW QUESTION 158
Which is the purpose of keeping the work site tidy?
- A. Prevent nails and other protrusions from injuring workers or tripping them
- B. Make your work comfortable
- C. In order to meet EHS legal requirements
Answer: A
NEW QUESTION 159
What are the correct descriptions of the operations that should be performed before the communication device is powered up? (Multiple choice)
- A. Check the electrical connection is firm and reliable
- B. Measure the power supply circuit without short circuit between each other and the ground
- C. All power switches of the powered device are disconnected
- D. Measuring no short circuit inside the powered device
- E. The output switch of the power supply device is disconnected and the output voltage is normal.
- F. Rated output current meets the requirements of powered devices
Answer: A,B,C,D,E,F
NEW QUESTION 160
What are the following stages of the "high-risk operation" process? (Multiple choice)
- A. Preparation stage
- B. Verification phase
- C. Implementation phase
- D. Confirmation phase
- E. Closed loop phase
Answer: A,B,C,E
NEW QUESTION 161
......
Resources From:
- 2021 Latest Actual4Labs H35-910-ENU Exam Dumps (PDF & Exam Engine) Free Share: https://www.actual4labs.com/Huawei/H35-910-ENU-actual-exam-dumps.html
Free Resources from Actual4Labs, We Devoted to Helping You 100% Pass All Exams!