Prepare NS0-184 Exam Questions [2023] Recently Updated Questions
Give push to your success with NS0-184 exam questions
Network Appliance NS0-184 exam is designed for individuals who are interested in becoming NetApp Certified Storage Installation Engineers. NetApp Certified Storage Installation Engineer, ONTAP certification validates the skills and knowledge required to install, configure, and maintain NetApp storage systems in a variety of environments. The NS0-184 exam covers a range of topics related to NetApp ONTAP, including storage hardware, software, networking, and security.
NEW QUESTION # 35
An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster.
In this scenario, which tool would the administrator use to validate the configuration?
- A. Active IQ Upgrade Advisor
- B. Active IQ Config Advisor
- C. NetAppDocs
- D. Interoperability Matrix Tool
Answer: C
NEW QUESTION # 36
Your customer plans to expand a 2-node FAS2750 switched cluster with two new controllers.
In this scenario, which two prerequisites should you examine in advance? (Choose two.)
- A. Verify that the platform of the new controllers can be mixed with the cluster's existing controllers.
- B. Verify that the existing cluster has a minimum 10 GB of free space for root volumes.
- C. Verify that the hard drives of the new controllers are compatible with the old controllers.
- D. Verify that the existing switches support the additional controllers.
Answer: A,B
NEW QUESTION # 37
You are preparing for the installation of a new 2-node switchless AFF A250 ONTAP 9.8 cluster and need to obtain the preinstallation information from the customer.
In this scenario, what are three examples of data required from the customer? (Choose three.)
- A. management IP addresses
- B. cluster switch name
- C. cluster name
- D. BMC IP addresses
- E. gateway IP address
Answer: A,B,D
NEW QUESTION # 38
Click the Exhibit button.
After installation of a new ONTAP cluster, you experience a problem. You successfully create a support case on the NetApp Support site. The customer asks you how to view the status of the case.
Referring to the exhibit, which two steps would allow the customer to accomplish this task? (Choose two.)
- A. Open https://support.netapp.com, using the partner credentials.
- B. Open https://support.netapp.com, using the customer credentials.
- C. Open My Cases, and select Create a Case.
- D. Open My Cases, and select the 41747189 case number.
Answer: B,D
NEW QUESTION # 39
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. SNMP traps
- B. AutoSupport messages
- C. command history
- D. EMS messages
Answer: B,C
NEW QUESTION # 40
Click the Exhibit button.
You want to add a FAS2750 HA pair to an existing 6-node cluster.
Referring to the exhibit, which action would you perform to begin adding the node?
- A. Use the back command to begin the Cluster Setup wizard.
- B. Use the exit or quit commands then run the cluster setup command.
- C. Use the node setup wizard and select 0a as the management interface.
- D. Reboot the node and enter maintenance mode and run the Cluster Setup wizard.
Answer: C
NEW QUESTION # 41
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
- A. intercluster LIF
- B. node management LIF
- C. SVM management LIF
- D. SVM data LIF
Answer: A
NEW QUESTION # 42
You installed a new pair of Cisco 92300YC cluster switches at a customer's site. Before you install any files on the switch, you want to view the current configuration.
In this scenario, which command would you use to accomplish this task?
- A. switchcfgshow
- B. show running-config
- C. fabricshow
- D. config show
Answer: A
NEW QUESTION # 43
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Enable in-band ACP.
- B. Remove the Ethernet cables.
- C. Disable out-of-band ACP.
- D. Move the SAS cables to a new stack.
Answer: C,D
NEW QUESTION # 44
You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.
In this scenario, which two licenses are enabled on the cluster? (Choose two.)
- A. iSCSI
- B. FCP
- C. NVMe
- D. CIFS
Answer: B,D
NEW QUESTION # 45
You install a 4-node cluster with an AFF A400 HA pair and a FAS8300 HA pair. After setup, you are asked to review the audit logs on each controller from a Web browser.
In this scenario, which method provides access to the logs from a Web browser?
- A. SPI
- B. DNS
- C. ACP
- D. ADP
Answer: A
NEW QUESTION # 46
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)
- A. The LIFs must use the default intercluster service policy.
- B. The LIFs must be in dedicated broadcast domains an IPspaces.
- C. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
- D. At least one LIF per node is required on each cluster.
Answer: A,B
NEW QUESTION # 47
After a system panic, the NetApp Support team advises you to run the sldiag command.
Which two actions must be performed before you use this command? (Choose two.)
- A. At the storage system prompt, type boot_maintenance.
- B. At the LOADER prompt, type boot_maintenance.
- C. At the storage system prompt, type halt.
- D. At the LOADER prompt, type boot_diags.
Answer: C,D
NEW QUESTION # 48
You installed a new 4-node AFF A400 ONTAP 9.8 cluster. The AFF400 controller data ports were automatically discovered by "automatic port placement".
In this scenario, which two ONTAP network settings were automatically configured? (Choose two.)
- A. IPspaces
- B. broadcast domains
- C. subnets
- D. routes
Answer: C,D
NEW QUESTION # 49
You are preparing for the installation of a new ONTAP 9.8 cluster and need to get the preinstallation information from the customer.
In this scenario, which NetApp tool would you use to create a configuration spreadsheet template for the deployment?
- A. Active IQ Config Advisor
- B. Interoperability Matrix Tool
- C. Active IQ Unified Manager
- D. ConfigBuilder
Answer: B
NEW QUESTION # 50
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use ONTAP System Manager to download and install the new software image.
- B. Use the cluster image package get and cluster image update commands.
- C. Use ONTAP System Manager to upload and install the new software image.
- D. Use a USB drive with the new software image and let ONTAP automatically boot.
Answer: A,B
NEW QUESTION # 51
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
- A. client network
- B. cluster LIFs
- C. private network
- D. management LIFs
Answer: B,C
NEW QUESTION # 52
Click the Exhibit button.
You are preparing to replace a Cisco Nexus 92300YC switch. You have executed the cluster ping-cluster node1 command and received the output as shown in the exhibit.
Which two checks indicate that the cluster is ready for the replacement to be performed? (Choose two.)
- A. 2 paths up, 0 paths down (UDP check)
- B. larger than PMTU communication succeeds on 4 path(s)
- C. 2 paths up, 0 paths down (TCP check)
- D. basic connectivity succeeds on 4 path(s)
Answer: C,D
NEW QUESTION # 53
......
Network Appliance NS0-184, also known as the NetApp Certified Storage Installation Engineer, ONTAP, is a certification exam that is designed to test the knowledge and skills of IT professionals who specialize in the installation and configuration of NetApp storage systems. NS0-184 exam is intended for individuals who have experience with NetApp ONTAP and have completed the NetApp Certified Storage Associate (NCSA) certification.
Get NS0-184 Actual Free Exam Q&As to Prepare Certification: https://www.actual4labs.com/NetworkAppliance/NS0-184-actual-exam-dumps.html
NS0-184 100% Guarantee Download NS0-184 Exam PDF Q&A: https://drive.google.com/open?id=1jT_aWjWazcTekV6zEaaNGBPKJhaQ5-8j