[Sep-2021] Pass Microsoft AZ-700 Exam in First Attempt Guaranteed!
Full AZ-700 Practice Test and 60 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 25
You have the Azure resources shown in the following table.
You configure storage1 to provide access to the subnet in Vnet1 by using a service endpoint.
You need to ensure that you can use the service endpoint to connect to the read-only endpoint of storage1 in the paired Azure region.
What should you do first?
- A. Create a virtual network in the paired Azure region.
- B. Configure the firewall settings for storage1.
- C. Fail over storage1 to the paired Azure region.
- D. Create another service endpoint.
Answer: B
NEW QUESTION 26
You have an Azure Virtual Desktop deployment that has 500 session hosts.
All outbound traffic to the internet uses a NAT gateway.
During peak business hours, some users report that they cannot access internet resources. In Azure Monitor, you discover many failed SNAT connections.
You need to increase the available SNAT connections.
What should you do?
- A. Add a public IP address.
- B. Bind the NAT gateway to another subnet.
- C. Deploy Azure Standard Load Balancer that has outbound rules.
Answer: A
NEW QUESTION 27
You are configuring two network virtual appliances (NVAs) in an Azure virtual network. The NVAs will be used to inspect all the traffic within the virtual network.
You need to provide high availability for the NVAs. The solution must minimize administrative effort. What should you include in the solution?
- A. Azure Standard Load Balancer
- B. Azure Front Door
- C. Azure Application Gateway
- D. Azure Traffic Manager
Answer: C
NEW QUESTION 28
You have an Azure subscription that contains the virtual networks shown in the following table.
You plan to deploy an Azure firewall named AF1 to RG1 in the West US Azure region.
To which virtual networks can you deploy AF1?
- A. Vnet1, Vnet2, and Vnet4 only
- B. Vnet1 only
- C. Vnet1 and Vnet4 only
- D. Vnet1, Vnet2. Vnet3, and Vnet4
- E. Vnet1 and Vnet2 only
Answer: A
NEW QUESTION 29
You have the hybrid network shown in the Network Diagram exhibit.
You have a peering connection between Vnet1 and Vnet2 as shown in the Peering-Vnet1-Vnet2 exhibit.
You have a peering connection between Vnet1 and Vnet3 as shown in the Peering -Vnet1-Vnet3 exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 30
In which NSGs can you use ASG1 and to which virtual machine network interfaces can you associate ASG1?
To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 31
You have an Azure Front Door instance named FD1 that is protected by using Azure Web Application Firewall (WAF).
FD1 uses a frontend host named app1.contoso.com to provide access to Azure web apps hosted in the East US Azure region and the West US Azure region.
You need to configure FD1 to block requests to app1.contoso.com from all countries other than the United States.
What should you include in the WAF policy?
- A. a managed rule set
- B. a custom rule that uses a rate limit rule
- C. a frontend host association
- D. a custom rule that uses a match rule
Answer: B
NEW QUESTION 32
You have an Azure Front Door instance named FrontDoor1.
You deploy two instances of an Azure web app to different Azure regions.
You plan to provide access to the web app through FrontDoor1 by using the name app1.contoso.com.
You need to ensure that FrontDoor1 is the entry point for requests that use app1.contoso.com.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION 33
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the following resources:
* A virtual network named Vnet1
* A subnet named Subnet1 in Vnet1
* A virtual machine named VM1 that connects to Subnet1
* Three storage accounts named storage1, storage2. and storage3
You need to ensure that VM1 can access storage1. VM1 must be prevented from accessing any other storage accounts.
Solution: You create a network security group (NSG). You configure a service tag for MicrosoftStorage and link the tag to Subnet1.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
NEW QUESTION 34
You need to connect Vnet2 and Vnet3. The solution must meet the virtual networking requirements and the business requirements.
Which two actions should you include in the solution? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. On the peering from Vnet1, select Allow gateway transit.
- B. On the peerings from Vnet2 and Vnet3, select Allow gateway transit.
- C. On the peering from Vnet1, select Allow forwarded traffic.
- D. On the peering from Vnet1, select Use remote gateways.
- E. On the peerings from Vnet2 and Vnet3, select Use remote gateways.
Answer: A,C
Explanation:
Topic 1, Litware. Inc Case Study 1
Overview
Litware. Inc. is a financial company that has a main datacenter in Boston and 20 branch offices across the United States. Users have Android, iOS, and Windows 10 devices.
Existing Environment:
Hybrid Environment
The on-prernises network contains an Active Directory forest named litwareinc.com that syncs to an Azure Active Directory (Azure AD) tenant named litwareinc.com by usinq Azure AD Connect.
All the offices connect to a virtual network named Vnetl by using a Site-to-Site VPN connection.
Azure Environment
Litware has an Azure subscription named Sub1 that is linked to the litwareinc.com Azure AD tenant. Sub1 contains resources in the East US Azure region as shown in the following table.
There is bidirectional peering between Vnet1 and Vnet2. There is bidirectional peering between Vnet1 and Vnet3. Currently, Vnet2 and Vnet3 cannot communicate directly.
Requirements:
Business Requirements
Litware wants to minimize costs whenever possible, as long as all other requirements are met.
Virtual Networking Requirements
Litware identifies the following virtual networking requirements:
* Direct the default route of 0.0.0.0/0 on Vnet2 and Vnet3 to the Boston datacenter over an ExpressRoute circuit.
* Ensure that the records in the cloud.litwareinc.com zone can be resolved from the on-premises locations.
* Automatically register the DNS names of Azure virtual machines to the cloud.litwareinc.com zone.
* Minimize the size of the subnets allocated to platform-managed services.
* Allow traffic from VMScaleSet1 to VMScaleSet2 on the TCP port 443 only.
Hybrid Networking Requirements
Litware identifies the following hybrid networking requirements:
* Users must be able to connect to Vnet1 by using a Point-to-Site (P2S) VPN when working remotely.
Connections must be authenticated by Azure AD.
* Latency of the traffic between the Boston datacenter and all the virtual networks must be minimized.
* The Boston datacenter must connect to the Azure virtual networks by using an ExpressRoute FastPath connection.
* Traffic between Vnet2 and Vnet3 must be routed through Vnet1.
PaaS Networking Requirements
Litware identifies the following networking requirements for platform as a service (PaaS):
* The storage1 account must be accessible from all on-premises locations without exposing the public endpoint of storage1.
* The storage2 account must be accessible from Vnet2 and Vnet3 without exposing the public endpoint of storage2.
NEW QUESTION 35
You are implementing the Virtual network requirements for Vnet6.
What is the minimum number of subnets and service endpoints you should create? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
2, 4
NEW QUESTION 36
You have an Azure subscription that contains the resources shown in the following table.
The IP Addresses settings for Vnet1 are configured as shown in the exhibit.
You need to ensure that you can integrate WebApp1 and Vnet1.
Which three actions should you perform in sequence before you can integrate WebApp1 and Vnet1? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION 37
You have an Azure subscription that contains the public IP addresses shown in the following table.
You plan to deploy a NAT gateway named NAT1.
Which public IP addresses can be used as the public IP address for NAT1?
- A. IP1, IP3, and IP5 only
- B. IP5 only
- C. IP2 and IP4 only
- D. IP3 and IP5 only
- E. IP3 only
Answer: A
NEW QUESTION 38
You are planning an Azure Point-to-Site (P2S) VPN that will use OpenVPN.
Users will authenticate by using an on premises Active Directory domain.
Which additional service should you deploy to support the VPN authentication?
- A. a certification authority (CA)
- B. an Azure key vault
- C. a RADIUS server
- D. Azure Active Directory (Azure AD) Application Proxy
Answer: D
NEW QUESTION 39
You have an Azure virtual network that contains the subnets shown in the following table.
You deploy an Azure firewall to AzureFirewallSubnet. You route all traffic from Subnet2 through the firewall.
You need to ensure that all the hosts on Subnet2 can access an external site located at https://*.contoso.com.
What should you do?
- A. In a firewall policy, create a DNAT rule.
- B. In a firewall policy, create a network rule.
- C. In a firewall policy, create an application rule.
- D. Create a network security group (NSG) and associate the NSG to Subnet2.
Answer: D
NEW QUESTION 40
You have 10 Azure App Service instances. Each instance hosts the same web app. Each instance is in a different Azure region.
You need to configure Azure Traffic Manager to direct users to the instance that has the lowest latency.
Which routing method should you use?
- A. priority
- B. weighted
- C. geographic
- D. performance
Answer: A
NEW QUESTION 41
What should you implement to meet the virtual network requirements for the virtual machines that connect to Vnet4 and Vnet5?
- A. a routing table
- B. a service endpoint
- C. a private endpoint
- D. a virtual network peering
- E. a private link service
Answer: B
NEW QUESTION 42
Your company has offices in New York and Amsterdam. The company has an Azure subscription. Both offices connect to Azure by using a Site-to-Site VPN connection.
The office in Amsterdam uses resources in the North Europe Azure region. The office in New York uses resources in the East US Azure region.
You need to implement ExpressRoute circuits to connect each office to the nearest Azure region. Once the ExpressRoute circuits are connected, the on-premises computers in the Amsterdam office must be able to connect to the on-premises servers in the New York office by using the ExpressRoute circuits.
Which ExpressRoute option should you use?
- A. ExpressRoute Global Reach
- B. ExpressRoute Local
- C. ExpressRoute Direct
- D. ExpressRoute FastPath
Answer: B
NEW QUESTION 43
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the following resources:
* A virtual network named Vnet1
* A subnet named Subnet1 in Vnet1
* A virtual machine named VM1 that connects to Subnet1
* Three storage accounts named storage1, storage2, and storage3
You need to ensure that VM1 can access storage1. VM1 must be prevented from accessing any other storage accounts.
Solution: You create a network security group (NSG) and associate the NSG to Subnet1.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
NEW QUESTION 44
......
Prepare for your Microsoft certification with the updated Actual4Labs AZ-700 exam questions: https://drive.google.com/open?id=1fCKZT_nvEBFrshOE-6KIbGSz1Lq39N5V
Get Latest AZ-700 Dumps Exam Questions in here: https://www.actual4labs.com/Microsoft/AZ-700-actual-exam-dumps.html