[Sep-2022] 3V0-42.20 Dumps are Available for Instant Access from Actual4Labs
Study resources for the Valid 3V0-42.20 Braindumps!
How to Prepare for Advanced Design VMware NSX-T Data Center 3.0
Preparation Guide for Advanced Design VMware NSX-T Data Center 3.0
Introduction for Advanced Design VMware NSX-T Data Center 3.0
Advanced Design NSX-T Data Center 3.0 exam tests an individual's ability to gather customer requirements, risks, constraints, and assumptions, and use that information to make design recommendations for NSX-T Data Center 3.0 solutions.
The minimally qualified candidate should have 1 year of experience designing NSX-T Data Center solutions and 2 or more years designing physical and virtual data centers/networks. Candidates will be adept at documenting requirements, risks, constraints, and assumptions. The successful candidate will likely hold additional industry-recognized IT certifications or accreditation.
You should also have the understanding or knowledge of these technologies:
- Switching and routing technologies (L2-L3)
- Knowledge and working experience with VMware vSphere environments and KVM-based environments
- Network and application delivery services (L4-L7)
- Good understanding of TCP/IP services and protocols
- Knowledge and working experience of computer networking, including:
This exam is specially for System Administrators who are responsible for the daily management, upkeep, and configuration of business computer systems. Future systems administrators can boost their marketability by getting certified. To prepare for Advanced Design VMware NSX-T Data Center 3.0, we offer the most in depth VMWARE 3V0-42.20 practice exam and VMWARE 3V0-42.20 practice exams.
NEW QUESTION 20
Refer to the exhibit.
A financial company is adopting micro-services with the intent of simplifying network security. An NSX-T architect is proposing a NSX-T Data Center micro-segmentation logical design. The architect has created a diagram to share with the customer.
How many security levels will be implemented according to this Logical Design? (Choose the best answer.)
- A. 4 levels
- B. 3 levels
- C. 9 levels
- D. 5 levels
Answer: D
NEW QUESTION 21
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
Some workloads should be moved to a Cloud Provider.
Extend network's VLAN or VNI across sites on the same broadcast domain.
Enable VM mobility use cases such as migration and disaster recovery without IP address changes.
Support 1500 byte MTU between sites.
Which selection should the architect include in their design? (Choose the best answer.)
- A. Load Balancer
- B. SSL VPN
- C. Reflexive NAT
- D. L2 VPN
Answer: D
NEW QUESTION 22
Which three assessment findings are part of a Conceptual Design? (Choose three.)
- A. vendor model
- B. risks
- C. host names
- D. assumptions
- E. justifications
- F. constraints
Answer: B,E,F
Explanation:
Explanation/Reference:
NEW QUESTION 23
A Solution Architect will be deploying an Ethernet Virtual Private Network (EVPN) in their NSX-T Data Center environment.
What two selections must be prepared for the EVPN deployment? (Choose two.)
- A. deployed Load Balancer
- B. remote gateway with support for IGP and VLAN priority
- C. deployed Tier-1 gateway
- D. remote gateway with support for MP-BGP and VXLAN
- E. deployed Tier-0 gateway
Answer: A,D
NEW QUESTION 24
Refer to the exhibits.
Design Option1:
Design Option 2:
Design Option 3:
Design Option 4:
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
The conceptual design includes these requirements, assumptions, constraints, and risks:
Critical applications must run across sites without changing IP address.
Business continuity and disaster recovery (BCDR) plans will leverage a second site running vSphere.
RTO/RPO must be reduced for recovery of applications on secondary site.
IT Teams require automation tools for configuration.
Which Conceptual Design would the architect recommend to the customer? (Choose the best answer.)
- A. Design Option 2
- B. Design Option 1
- C. Design Option 4
- D. Design Option 3
Answer: B
NEW QUESTION 25
Which three choices are part of a Design Approach when discussing design alternatives and their effects? (Choose three.)
- A. performance
- B. budget
- C. backup
- D. knowledge
- E. cost
- F. security
Answer: A,D,F
NEW QUESTION 26
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
There isn't much budget available for a new off shore site.
The new site is decentralized and no communication with the main data center is required.
The design will need to cater for availability, upgrades, and failure scenarios.
N+1 must be maintained at all times.
Which three selections should the architect recommend in their design? (Choose three.)
- A. Make all pNICs part of N-VDS and VMKs will be migrated.
- B. A Shared Edge/Management cluster and one for Compute.
- C. Install a minimum 4 ESXi hosts in the site.
- D. Collapse the Management/Edge/Compute cluster.
- E. Install a minimum of 3 ESXi hosts in the site.
- F. Separate the hosts physical NICs for VSS and N-VDS.
Answer: A,D,F
NEW QUESTION 27
A customer deploying NSX-T Data Center requires role based access controls be enforced in NSX Manager with these requirements:
* identity platform must be highly available
* authentication must be performed by customer's existing SAML identity provider
* MFA must be performed by administrator to gain access to NSX Manager
Which identity deployments would meet the customer's requirements? (Choose the best answer.)
- A. NSX Manager OAuth 2.0 registered to a 3-node VMware Identity Manager cluster.
- B. NSX Manager OAuth 2.0 registered to a 2-node Active Directory Federation Services cluster
- C. NSX Manager OAuth 2.0 registered to a 2-node VMware Identity Manager cluster.
- D. NSX Manager OAuth 2.0 registered to a 3-node Active Directory Federation Services cluster.
Answer: A
NEW QUESTION 28
A Solutions Architect is working with a customer which wants to extend their traditional Telco IP/MPLS core network to an NFV cloud.
Which NSX-T Data Center feature can be recommended by the architect? (Choose the best answer.)
- A. Load Balancer
- B. BGP
- C. Distributed IDS
- D. EVPN
Answer: B
Explanation:
Explanation/Reference: https://docs.vmware.com/en/VMware-vCloud-NFV/3.0/vmware-vcloud-nfv-30.pdf
NEW QUESTION 29
A Solutions Architect is assisting a service provider with designing an NSX-T Data Center solution for these environments:
Virtual Data Center to Virtual Data Center connectivity
Tenant workload on-boarding to Virtual Data Centers.
These requirements must be met:
scalability across 5 data centers
all sites have a latency of 180ms
MTU between sites is 1800
bandwidth is 100Mbps between sites
multi-tenancy
Which two selections should the Solutions Architect propose to the service provider? (Choose two.)
- A. Utilize SSL VPN for workloads on-boarding from on-premises to Virtual Data Centers.
- B. Configure Remote TEPs for stretching network services between Virtual Data Centers.
- C. Configure IPSec VPN for Tenant T0 gateways for Virtual Data Centers connectivity
- D. Utilize L2 VPN for workloads on-boarding from on-premises to Virtual Data Centers.
- E. Configure IPSec VPN for Tenant T1 gateways for Virtual Data Centers connectivity.
Answer: D,E
NEW QUESTION 30
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
Any proposed solution must provide low latency.
Any proposed solution must provide high throughput.
Customer is running stock trading applications.
Which two selections should the architect recommend to meet high-performance workload requirements? (Choose two.)
- A. Enable enhanced data path mode on the N-VDS.
- B. Leverage ESXi as the compute host.
- C. Use LACP for all uplink profiles.
- D. Leverage KVM as the compute host.
- E. Enable latency sensitivity mode on the N-VDS.
Answer: A,B
NEW QUESTION 31
What is a design justification for a solution with 3 NSX Manager nodes deployed in a 4 ESXi cluster Management Cluster? (Choose the best answer.)
- A. Compute consumption guarantees NSX Manager nodes can be run on the same ESXi host.
- B. Single point of failure on Control Plane and Management Plane will be mitigated.
- C. NSX Controllers are separated from NSX Managers allowing 6 ESXi servers to host them.
- D. NSX Management Plane and Control Plane will be reduced to a single point of failure.
Answer: D
NEW QUESTION 32
Which selection must be taken into consideration when creating a Logical Design for a planned migration? (Choose the best answer.)
- A. An N-VDS must be disabled before attaching both Overlay and VLAN transport zones.
- B. An N-VDS can only attach to a single VLAN transport zone.
- C. An N-VDS can attach to both an Overlay and a VLAN transport zone to a N-VDS having different name/s.
- D. An N-VDS can only attach to a single Overlay transport zone.
Answer: B
NEW QUESTION 33
Which type of design includes vendor models, host names, IP Addresses, port connections, logical unit number sizes, and number of CPUs? (Choose the best answer.)
- A. Physical Design
- B. High-Level Design
- C. Logical Design
- D. Conceptual Design
Answer: A
NEW QUESTION 34
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
Existing hardware will be used in any design proposal.
Network bandwidth cannot be expanded.
Which concept of the Discover Task do these items belong to? (Choose the best answer.)
- A. requirement
- B. risk
- C. assumption
- D. constraint
Answer: D
NEW QUESTION 35
......
The benefit in Obtaining the Advanced Design VMware NSX-T Data Center 3.0
- VMware certification will help the independent consultants to attract new business as they'll use VMware Certified Professional logo in their business cards and websites.
- Currently there is a huge gap in the skills in the virtualization i.e. there are more work opportunities for virtualization than the certified and trained people to occupy them.
- VMware certifications open the door to career opportunities at the world's leading companies. All of the Fortune 100 are using VMware's virtualization technologies.
IT is made simple with VMware technology, and workloads are spread more easily, processes are automatic, usability is improved, and so on. Different service vendor provides training to understand, implement, deploy, and manage businesses on VMware technology. As per VMware learning zone:
- 89% agree that certification exams increased their ability to handle complicated projects and problems
- 97% agree that their credibility has improved due to the certification
- 92% agree that job productivity has increased due to the certification
- 92% agree that after getting certified they can provide better customer satisfaction
We recommend VMWARE 3V0-42.20 practice exam and VMWARE 3V0-42.20 practice exams to solidify your skills and demonstrate your worth.
Updated 3V0-42.20 Tests Engine pdf - All Free Dumps Guaranteed: https://www.actual4labs.com/VMware/3V0-42.20-actual-exam-dumps.html
Latest VCAP-NV Design 2020 3V0-42.20 Actual Free Exam Questions: https://drive.google.com/open?id=1J-7rxnrRfumCREOQ-l48-owP0LRWEN24