Updated Jan-2023 Exam Engine for 1Y0-241 Exam Free Demo & 365 Day Updates
Exam Passing Guarantee 1Y0-241 Exam with Accurate Quastions!
How to study the Citrix 1Y0-241: Deploy and Manage Citrix ADC 13 with Traffic Management Exam
Actual4Labs expert team recommends you to prepare some notes on these topics along with it don't forget to practice Citrix ADC 13 Essentials and Traffic Management exam which been written by our expert team, Both these will help you a lot to clear this exam with good marks. Actual4Labs assure exactness of Citrix 1Y0-241 practice test and in this manner, it would be helping the candidates to pass the 1z0-817 exam. We recommend you to take 1z0-817 practice exams to boost your confidence level before sitting in the real exam.
NEW QUESTION 36
A Citrix Administrator configured global server load balancing (GSLB) for www.citrix.com, with two ADNS services named Citrix ADC 1 and Citrix ADC 2 in the setup.
Which record does the administrator need to add on the parent DNS server to delegate requests from www.citrix.com to Citrix ADC 1 and Citrix ADC 2?
- A. Address (A) record
- B. Canonical Name (CNAME)
- C. Pointer Record (PTR)
- D. Name Server (NS) record
Answer: D
NEW QUESTION 37
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Image lazy loading
- B. Image shrink-to attributes
- C. Image optimization
- D. Domain sharding
Answer: C
Explanation:
Explanation
NEW QUESTION 38
Which four authentication types can a Citrix Administrator use for Citrix ADC authentication, authorization, and auditing (AAA) multifactor authentication? (Choose four.)
- A. LDAP
- B. TACACS+
- C. OAuth
- D. RADIUS
- E. NTLM
- F. FIDO2
- G. ADFS
Answer: A,C,D,F
NEW QUESTION 39
set gslb vServer-GSLB-1-MIR ENABLED
What will the Citrix ADC appliance send when the above command is executed?
- A. The best global server load balancing (GSLB) service as the first record in the response, and the remaining active services as additional records
- B. Only the best GSLB service in the response
- C. The Remote GSLB service as the first record in the response and adds the remaining active services as additional records
- D. The Local GSLB service as the first record in the response and adds the remaining active services as additional records
Answer: D
NEW QUESTION 40
Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?
- A. Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.
- B. Interface 1/1 is bound to VLAN 20, and native VLAN is 20.
- C. Interface 1/1 is bound to VLAN 20, and native VLAN is 40.
- D. Interface 1/1 is bound to VLAN 20, and native VLAN is 1.
Answer: A
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX122921
NEW QUESTION 41
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least bandwidth
- B. Least packets
- C. Least response time
- D. Least connection
Answer: D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/load- balancing.html
NEW QUESTION 42
To protect an environment against Hash DoS attacks, which two configurations can a Citrix Administrator use to block all post requests that are larger than 10,000 bytes? (Choose two.)
- A. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE - B. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE - C. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 100 END -type REQ_OVERRIDE - D. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE - E. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE - F. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 70 END -type REQ_OVERRIDE
Answer: C,D
NEW QUESTION 43
Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?
- A. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*" - B. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
- C. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
- D. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
Answer: B
NEW QUESTION 44
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?
- A. Citrix ADC MPX
- B. Citrix ADC CPX
- C. Citrix ADC VPX
- D. Citrix ADC SDX
Answer: B
Explanation:
Explanation/Reference: https://www.citrix.com.br/products/citrix-adc/cpx-express.html
NEW QUESTION 45
Scenario: A Citrix Administrator executed the following command in a global server load balancing (GSLB) environment:
set gslb site SiteB -triggerMonitor MEPDOWN
What will be the effect of this command on the default service monitoring behavior on a remote site?
- A. The service monitor is invoked only when Metric Exchange Protocol (MEP) connectivity has been lost between Site A and Site B.
- B. The service monitor will take precedence over Metric Exchange Protocol (MEP).
- C. The state of the GSLB service will always be controlled by Metric Exchange Protocol (MEP).
- D. The service monitor is invoked only when Metric Exchange Protocol (MEP) has marked the service as DOWN.
Answer: D
NEW QUESTION 46
Scenario: The policies below are bound to a content switching vServer.
bind cs vServer vserver1 -policyName CSPOL_7 -priority 100 -gotoPriorityExpression NEXT bind cs vServer vserver1 -policyName CSPOL_5 -priority 90 bind cs vServer vserver1 -policyName CSPOL_9 -priority 110 bind cs vServer vserver1 -policyName CSPOL_4 -priority 120 bind cs vServer vserver1 -policyName CSPOL_8 -priority 210 Policy CSPOL_7 has been invoked.
Which policy will be invoked next?
- A. CSPOL_9
- B. CSPOL_8
- C. CSPOL_4
- D. CSPOL_5
Answer: D
NEW QUESTION 47
Which mode on a Citrix ADC can a Citrix Administrator utilize to avoid asymmetrical packet flows and multiple route/ARP lookups?
- A. Layer 2
- B. Layer 3
- C. MAC-based forwarding (MBF)
- D. Use Subnet IP (USNIP)
Answer: B
NEW QUESTION 48
Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)
- A. Configure CS policies that designate a load-balancing vServer as the target vServer.
- B. Bind the domain to the CS vServer instead of the GSLB vServer.
- C. Bind the GSLB domain to the GSLB vServer.
- D. Configure a CS vServer of target type GSLB.
Answer: A,D
NEW QUESTION 49
Scenario: A Citrix Administrator gives permissions to team members to access their own admin partition. This will allow them to add resources for different departments and manage them without making changes to the default Citrix ADC partition and configuration.
One team member typing to use the command line interface (CLI) to troubleshoot an authentication issue could NOT use aaad.debug. However, the team member has full permissions on the admin partition.
What can be the cause of this issue?
- A. The team member does NOT have permission to use the CLI.
- B. The team member does NOT have shell access by design.
- C. The team member is NOT using the CLI correctly.
- D. The team member needs to troubleshoot the issue from the GUI.
Answer: B
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/admin-partition.html
NEW QUESTION 50
A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information?
What could be causing this?
- A. TCP logging is NOT enabled.
- B. User-defined audit log is NOT configured.
- C. Log level is NOT enabled.
- D. Log facility is NOT configured.
Answer: A
Explanation:
https://support.citrix.com/article/CTX226058
NEW QUESTION 51
Which mode does a Citrix Administrator need to configure to allow a Citrix ADC to control the packetforwarding function based on the route table lookups?
- A. Layer 2
- B. Layer 3
- C. MBF
- D. USIP
Answer: B
Explanation:
Layer 3 mode controls the Layer 3 forwarding function. You can use this mode to configure a Citrix ADC appliance to look at its routing table and forward packets that are not destined for it. https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/configure-system-settings/configure-modes-packet-forwarding.html
NEW QUESTION 52
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Image lazy loading
- B. Image shrink-to attributes
- C. Image optimization
- D. Domain sharding
Answer: C
NEW QUESTION 53
What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?
- A. A certificate revocation list (CRL)
- B. A certificate key-pair
- C. A certificate signing request (CSR)
- D. A private key
Answer: D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/how-to-articles/create-and-use-ssl- certificates-on-a-citrix-adc-appliance.html
NEW QUESTION 54
Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new ones. The changes caused an outage that needs to be resolved as quickly as possible. There is no Citrix ADC backup.
What does the administrator need to do to recover the configuration quickly?
- A. Run highly availability (HA) file synchronization.
- B. Run saved versus running configuration.
- C. Restore from the revision history.
- D. Restart the Citrix ADC.
Answer: C
NEW QUESTION 55
Scenario: The policies below are bound to a content switching vServer.
bind cs vServer vserver1 -policyName CSPOL_7 -priority 100 -gotoPriorityExpression NEXT bind cs vServer vserver1 -policyName CSPOL_5 -priority 90 bind cs vServer vserver1 -policyName CSPOL_9 -priority 110 bind cs vServer vserver1 -policyName CSPOL_4 -priority 120 bind cs vServer vserver1 -policyName CSPOL_8 -priority 210 Policy CSPOL_7 has been invoked.
Which policy will be invoked next?
- A. CSPOL_8
- B. CSPOL_4
- C. CSPOL_5
- D. CSPOL_9
Answer: D
Explanation:
https://training.citrix.com/public/Exam%20Prep%20Guides/231/1Y0-231_Exam_Preparation_Guide_v01.pdf
NEW QUESTION 56
A Citrix Administrator receives user complaints about latency while accessing an application that is load balanced on the Citrix ADC.
Which tool can the administrator use to gather information regarding response time, client network latency, and server-side processing time?
- A. WAN Insight
- B. HDX Insight
- C. Citrix Application Delivery Management (ADM)
- D. Security Insight
Answer: C
NEW QUESTION 57
Scenario:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding "\"identity\"" add rewrite policy POL_2 "HTTP.REQ.IS_VALID " ACT_2 How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?
- A. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- B. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST
- C. bind lb vServer lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- D. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -type REQUEST
Answer: A
Explanation:
- Pol1 has a prio of 90 so it's evaluated first
-gotoPrioExpression NEXT means that it will evaluate next item in the policy list
- Pol2 has a prio of 100, so it"s avaluated after Pol1
NEW QUESTION 58
Which Citrix ADC feature can a Citrix Administrator employ to reuse existing TCP connections?
- A. Content switching
- B. Keep-alive
- C. Connection multiplexing
- D. TCP buffering
Answer: C
NEW QUESTION 59
If a policy evaluates as_________________ a Citrix ADC performs the action assigned to the ____________ condition and stops further policy evaluation.
- A. UNDEFINED; FALSE
- B. UNDEFINED; TRUE
- C. TRUE; FALSE
- D. UNDEFINED; UNDEFINED
Answer: A
NEW QUESTION 60
A Citrix Administrator deploys a new Citrix ADC MPX appliance in the demilitarized zone (DMZ), with one interface in the DMZ and the other on the internal network.
In which mode should the administrator deploy the Citrix ADC?
- A. Transparent
- B. One-arm
- C. Two-arm
- D. Forward proxy
Answer: C
NEW QUESTION 61
......
Exam Questions for 1Y0-241 Updated Versions With Test Engine: https://www.actual4labs.com/Citrix/1Y0-241-actual-exam-dumps.html
Test Engine to Practice Test for 1Y0-241 Valid and Updated Dumps: https://drive.google.com/open?id=1lCPLyR-Wu5V-3QLz03D2zC5r6-fdG-uh