Verified HPE0-J68 dumps Q&As - 2021 Latest HPE0-J68 Download
Updated 100% Cover Real HPE0-J68 Exam Questions - 100% Pass Guarantee
NEW QUESTION 49
Which actions can be done within InfoSight Cross-Stack Analytics for VMware and Hyper-V? (Choose two.)
- A. Modify administrative privileges
- B. Find noisy neighbors
- C. Locate inactive VMs
- D. Review backup schedules
- E. View replication policies
Answer: B,C
NEW QUESTION 50
During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)
- A. Node maintenance or failure
- B. B-series SAN switch upgrades
- C. Loss of full-mesh cluster interconnect
- D. Loss of persistent cache
- E. Firmware upgrade
Answer: A,E
NEW QUESTION 51
What are two advantages of HPE Recovery Manager Central? (Select two.)
- A. Enables automatic transparent failover
- B. Integration capabilities utilizing HTML
- C. Includes Peer Copy asynchronous replication
- D. Manual data provisioning and policy-based copy protection
- E. Less expensive than traditional backup
Answer: C,E
NEW QUESTION 52
A customer has a Nimble HF40 and needs to create a support ticket.
Click the option in the InfoSight portal where the customer can perform this task.
Answer:
Explanation:
NEW QUESTION 53
A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD's configured with RAID5 7+1. They plan to add four more 3.84 TB SSD's.
What needs to be changed on the configuration once the new SSD's are installed?
- A. Adjust the cpg growth value to match amount of SSD's.
- B. Reconfigure the cpg setsize as RAID6 6+2 and wait for tunesys to complete.
- C. Change the cpg setsize to RAID5 5+1 and run tunesys.
- D. Change the availability level from cage to magazine.
Answer: C
NEW QUESTION 54
A customer has a SAN based on HPE B-series switches with Gen6 fibre channel technology. Their workload is continually growing and they are experiencing performance issues. They need a solution to enable real-time monitoring and to speed up troubleshooting in his SAN backend.
Which unique feature of the HPE B-series Gen6 switches should you recommend? (Choose two.)
- A. Fabric Watch
- B. Fabric Vision
- C. Extended Fabrics
- D. MAPS
- E. Advanced Trunking
Answer: A,B
NEW QUESTION 55
A customer recently acquired another company and found that the existing infrastructure was outdated and costly to maintain. They need to put a complete infrastructure solution in place that minimizes the footprint in the data center as quickly and possible. Which solution you recommend?
- A. Converged systems
- B. Bladesystem 7000
- C. Simplicity 380
- D. Synergy 12000
Answer: C
NEW QUESTION 56
Which tool is used to provide centralized management of 3PAR and Primera arrays?
- A. SSMC
- B. WebUI
- C. Primera UI
- D. SMU
Answer: A
NEW QUESTION 57
A customer is evaluating an HPE 3PAR StoreServ system in a proof-of-concept project. The customer wants to receive emails about important storage system events and alerts.
What feature do you need to configure?
- A. Local Notification Service
- B. Secure Service Agent
- C. HPE OneView integration
- D. Real-time Alert Processing
Answer: A
NEW QUESTION 58
A customer has the following requirements for a storage solution:
VMware environment
20 TB of standard business data
400 TB of video archive files
10 GB iSCSI connectivity
They are most concerned with the cost of the solution.
Which HPE storage solution offers the lowest cost while meeting the customer requirements?
- A. HPE Primera
- B. HPE Nimble
- C. HPE MSA
- D. HPE SimpliVity
Answer: A
NEW QUESTION 59
Which protocols are currently used in the front end by HPE 3PAR StoreServ systems? (Choose two.)
- A. Infiniband
- B. FC
- C. iSCSI
- D. NVMe
- E. SAS
Answer: B,C
NEW QUESTION 60
A customer needs a centralized solution for storing departmental data to be accessed by Windows-based laptops and other personal devices.
Which solution should you recommend?
- A. Block storage, directly accessed over FC
- B. File-oriented storage, accessed over SMB
- C. Block storage, directly accessed over SAS
- D. Object storage, accessed over S3 connector
Answer: C
NEW QUESTION 61
You have proposed a Primera array to a customer for new primary storage. The customer currently has an older 3PAR array that they will continue to use moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)
- A. 4-port 1 Gb Ethernet Adapter (NIC) is required in each array
- B. Target drive type must match source drive type
- C. No license is required
- D. RMC 6.2 is required
- E. 2-port 10 Gb Ethernet Adapter (NIC) is required
Answer: A,D
NEW QUESTION 62
After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC) configuration and want to raise it from 256 to 768GB. Which action is needed to take advantage of the new AFC configuration?
- A. Remove the old AO configuration and recreate a new one
- B. Increase current AFC configuration to reflect the additional space
- C. Remove flash cache for all VVS then run create Flash cache
- D. Run tunesys after raising the AFC to take advantage of the additional space
Answer: C
NEW QUESTION 63
During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches. Which port mode must be set enable communication between the switches?
- A. N_PORT
- B. E_PORT (Correct)
- C. FL_PORT (WRONG)
- D. F_PORT
Answer: B
NEW QUESTION 64
Which statement is correct when comparing functionalities of the AF,CF, and SF series in the nimble storage portfolio?
- A. Zero copy clone are unique feature of all flash array within the nimble portfolio
- B. Inline deduplication for complete array capacity in combination with compression is offered by the AF and SF series only (67) need to check
- C. 99.9999% availability measured and guaranteed for AF and CF series arrays, SF series array offer 99.999% availability.
- D. SF series supports storage snapshots and replication using veeeam backup & replication CS and AF series support storage snapshot only.
Answer: B
NEW QUESTION 65
A customer wants to make a full copy replica of a database to use for performance testing.
Which technology should they use to create the copy?
- A. clone
- B. deduplication
- C. synthetic full
- D. snapshot
Answer: D
NEW QUESTION 66
A customer asks for a 50 TB disk-based backup solution with deduplication. They also need additional storage for test/dev purposes.
Which single HPE storage platform can you present to the customer that will meet both of their needs?
- A. HPE StoreEasy Gateway
- B. HPE Nimble SF series
- C. HPE StoreOnce
- D. HPE Nimble CS series
Answer: B
Explanation:
HPE quick specs , they also offer the flash-optimized performance needed to run development/test, QA, and analytics workloads on your backup data-plus production workloads when needed.
NEW QUESTION 67
How does HPE StoreVirtual DSM for windows enhanced Microsoft windows native MPIO?
- A. It automatically create an I/O path to each storage system in the cluster
- B. It automatically adjusts transfer block
- C. It automatically adjusts the availability bandwidth between the switch and the array
- D. It automatically combines HPE thin provisioning and volume migration technology
Answer: A
NEW QUESTION 68
A customer is looking for a centralized file-sharing solution that can provide print services in addition to 15TB of storage.
Which solution component should you recommend?
- A. FC switch
- B. NAS
- C. Disk enclosure with integrated SAS switch
- D. FC-based array
Answer: B
NEW QUESTION 69
You are planning an upgrade to a customer's existing HPE 3PAR StoreServ 8200 to include 4-port 16Gb FC adapters. The servers are zoned to see the storage via four paths. The customer is concerned about storage availability during the upgrade.
Which statement is correct about performing this upgrade?
- A. When NPIV is enabled, the HPE 3PAR Port persistence will show all four paths to the servers.
- B. Windows servers require host explorer is installed to ensure MPIO is unaffected.
- C. The MPIO service will do a failover, and the servers will continue to have access via two paths.
- D. As long as MEM driver is installed on VMware vSphere, no path failures are seen.
Answer: A
NEW QUESTION 70
......
Use Real Dumps - 100% Free HPE0-J68 Exam Dumps: https://www.actual4labs.com/HP/HPE0-J68-actual-exam-dumps.html
Realistic HPE0-J68 Dumps Latest Practice Tests Dumps: https://drive.google.com/open?id=1-gUdMc8sobZjWNbzgpCgo8H77DULcwAe