Latest NACE-CIP1-001 exam dumps with real NACE questions and answers
NACE-CIP1-001 Exam in First Attempt Guaranteed
You can find out about the exam cost of NACE CIP1-001 Certification.
The NACE CIP1-001 certification exam is affordable. It costs about $300.
The topics of the NACE CIP1-001 Exam are discussed here
- Paint applicators and blasters
- Quality assurance/control managers
- Maintenance personnel
- Contractors and specification writers
- Coating manufacturers and technical sales representatives
- Program/project managers and engineers
NEW QUESTION # 11
You are an inspector on a project where SSPC SP 3 is specified.
What sort of tools should you expect the Contractor to use to achieve the standard?
- A. Hand tools
- B. Airless spray equipment
- C. Abrasive blast nozzles
- D. Power tools
Answer: D
NEW QUESTION # 12
When holiday testing is required the Inspector is always required to enforce NACE SP 0188:
- A. False
- B. True
Answer: B
NEW QUESTION # 13
When working as a NACE Inspector in a situation where there is a difference of opinion, the Inspector needs to:
- A. Go with the majority opinion
- B. Achieve consensus through negotiation
- C. Never change his/her mind
- D. Call the supervisor
Answer: D
NEW QUESTION # 14
In a non-convertible coating the role of the primary solvent is to:
- A. To promote faster cure
- B. To control the evaporation rate
- C. To dissolve the resin
- D. To make the coating flow out better
Answer: B
NEW QUESTION # 15
The least effective method of surface cleaning is most likely
- A. dry grit blasting.
- B. hand tool cleaning.
- C. water blasting.
- D. power tool cleaning.
Answer: B
NEW QUESTION # 16
Stripe coats are generally applied to:
- A. a), b), and c)
- B. Welds
- C. Edges and corners
- D. Complex geometric shapes
Answer: A
NEW QUESTION # 17
When the joint NACE/SSPC abrasive blast cleaning standards are specified, the pictures in SSPC VIS 1 can be used as:
- A. Pass/fail criteria
- B. A general guide
- C. A final conflict resolution method
- D. A method to grade surface profile
Answer: B
NEW QUESTION # 18
Inspection documentation is important because:
- A. It is the only deliverable item provided by the inspector
- B. a) & b)
- C. Owners use the documentation for a variety of purposes
- D. a) only
Answer: C
NEW QUESTION # 19
If the specifier does not identify a restriction level in accordance with SSPC PA 2, the default restriction level is:
- A. Level 1
- B. Level 2
- C. Level 3
- D. Level 4
Answer: C
NEW QUESTION # 20
ASTM Standards are applicable:
- A. In the USA
- B. In North America
- C. When specified
- D. In Asia
Answer: C
NEW QUESTION # 21
How many gauge readings does SSPC-PA 2 require within a 4 cm (1.5 inch) diameter circle?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 22
You are asked to be the only coating inspector on a small bridge recoating job where existing coating contains lead. The owners' representative has supplied you with the local code governing the removal and disposal of lead based coatings, however upon reading the document you having great deal of difficulty understanding the technical language.
As a NACE CIP Level 1 Inspector your preferred course of action is to:
- A. Hire a third patty to assist you in understanding the document
- B. Carefully review the document and do the best you can
- C. Advise the owners' representative of your lack of knowledge in this area
- D. Minimize your lack of understanding and go ahead with the inspection task to the best of your ability
Answer: B
NEW QUESTION # 23
Check abrasive blast pressure with a
- A. needle pressure gauge
- B. replica tape
- C. surface comparator
- D. nozzle aperature gauge
Answer: A
NEW QUESTION # 24
Surface profile describes:
- A. The initial condition of the surface prior to abrasive blasting
- B. The level of surface roughness required after abrasive blasting
- C. The level of surface cleanliness required after abrasive blasting
- D. The general condition of the surface required after abrasive blasting
Answer: B
NEW QUESTION # 25
Solvents are added to coating formulations to
- A. dissolve binders and form liquid coatings.
- B. decrease film permeability.
- C. increase film permeability.
- D. provide color.
Answer: A
NEW QUESTION # 26
Dew point is the temperature at which
- A. condensation occurs.
- B. water freezes.
- C. the air is saturated.
- D. humidity decreases
Answer: A
NEW QUESTION # 27
What is the minimum spot measurement value allowed by SSPC-PA 2 in each 10 m2 (100 ft2) area?
- A. 100% of the specified maximum thickness
- B. 80% of the specified minimum thickness
- C. 70% of the specified maximum thickness
- D. 90% of the specified maximum thickness
Answer: B
NEW QUESTION # 28
An exposed area of the substrate or previous coat of a conductive coating material, often caused by poor application technique is called
- A. holiday.
- B. sagging.
- C. checking.
- D. cracking.
Answer: A
NEW QUESTION # 29
......
Exam Sure Pass NACE Certification with NACE-CIP1-001 exam questions: https://www.actual4labs.com/NACE/NACE-CIP1-001-actual-exam-dumps.html
Download Real NACE-CIP1-001 Exam Dumps for candidates. 100% Free Dump Files: https://drive.google.com/open?id=1J0QuAj_RrAIdm9MrnAAtdw_GZuAvX_ZM