Free NACE-CIP1-001 Questions for NACE NACE-CIP1-001 Exam [Dec-2024]
Validate your NACE-CIP1-001 Exam Preparation with NACE-CIP1-001 Practice Test (Online & Offline)
What is the Passing Score, Duration & Question for the NACE CIP1-001 Exam?
- Exam Format: Multiple choice
- Duration Exam: 2 hours
- Languages: English
- No. of questions: 100
- Passing score: at least 50%
NACE-CIP1-001 certification is recognized globally and is highly valued by employers in the coating inspection industry. It provides individuals with a competitive edge in the job market and opens up opportunities for career growth. Coating Inspector Level 1 certification exam validates the individual's knowledge and skills in coating inspection, which in turn enhances their credibility and reputation in the industry.
NEW QUESTION # 44
Relative humidity is
- A. a measure of the amount of moisture in the air compared to saturation level.
- B. the highest temperature at which moisture forms on a steel surface.
- C. the lowest temperature at which moisture forms on a steel surface.
- D. a measure of the amount of moisture in the air compared to the air temperature.
Answer: A
NEW QUESTION # 45
ISO SA 2 is defined as:
- A. Near White Metal Blasting
- B. Very Thorough Blast Cleaning
- C. Thorough Blast Cleaning
- D. Light Blast Cleaning
Answer: C
NEW QUESTION # 46
Owners hire NACE Inspectors' with the expectation that:
- A. a) and c)
- B. The inspection cost will be offset by an improvement in service life
- C. The Inspector will make a meaningful technical contribution to the job
- D. The Inspector will improve job flow and schedule
Answer: A
NEW QUESTION # 47
Daily reports are important because:
Select All That Apply
- A. The information aids communication with supervisors.
- B. the information impacts future projects.
- C. Inspectors rarely change on a project.
- D. Management uses them to make personnel decisions.
Answer: A,B,D
NEW QUESTION # 48
A successful coating inspector must be able to
- A. look for problems or issues during application.
- B. advise the coating applicator on how to mix the coating.
- C. recommend the appropriate coating technique for the job to the contractor.
- D. apply the coating with expert accuracy.
Answer: A
NEW QUESTION # 49
You are the NACE Inspector on a job where the Owner's specification requites you to perform a twice daily check of blast pressure at the nozzle. It is now day 30 on the job and all of your readings have been within compliance. The Contractor complains that these checks taking up much time and in view of the compliant results they are unnecessary.
Your FIRST preferred course of action is to:
- A. Keep doing the checks regardless
- B. Skip the checks as you are. confident the blast pressure is OK
- C. Skip the checks and just record the same readings as you have been getting
- D. Keep doing the checks and consult the Owner's representative for direction
Answer: D
NEW QUESTION # 50
Which of these tests uses a syringe?
- A. Bresle patch
- B. Soluble salts meter
- C. Potassium ferricyanide
- D. Sleeve test
Answer: A
NEW QUESTION # 51
The form of corrosion that has the largest potential for unexpected catastrophic failure is:
- A. Galvanic Corrosion
- B. Localized Corrosion
- C. General Corrosion
- D. Atmospheric Corrosion
Answer: A
NEW QUESTION # 52
To achieve consistently accurate results with ALL alt test equipment
- A. wash your hands before sampling.
- B. calibrate the instrument in the field.
- C. wear gloves when sampling.
- D. avoid placing the sample discs on a surface.
Answer: A
NEW QUESTION # 53
Prior to using Inspection Tools the inspector must:
- A. Ensure the instrument is within calibration parameters
- B. a), b) & c)
- C. Read the manufactures' instructions
- D. Be trained on how to use the instrument
Answer: B
NEW QUESTION # 54
Common errors that can produce inaccurate readings when using Wet Film Thickness (WFT) gauges include:
Select All That Apply
- A. Dragging a gauge through wet coating
- B. Using a damaged gauge
- C. Placing the gauge along the longitudinal axis
Answer: A,B
NEW QUESTION # 55
If inspectors identify issues of non-conformance during an inspection, they should
- A. wait until the final report is being prepared to identify the issues in writing so they are fully documented
- B. inform both the Contractor and the inspector's supervisor so they can take appropriate corrective actions
- C. perform additional tests secretly to ensure there are no other potential issues at the site
- D. instruct the contractor's personnel in how to correct the issue so the project is not delayed
Answer: B
NEW QUESTION # 56
Stripe coats are generally applied to:
- A. Welds
- B. a), b), and c)
- C. Edges and corners
- D. Complex geometric shapes
Answer: B
NEW QUESTION # 57
The Inspector's Log Book is generally:
- A. Retained by the inspector upon project completion
- B. Shared with all parties upon project completion
- C. Submitted to the client upon project completion
- D. Shredded by the inspector upon project completion
Answer: A
NEW QUESTION # 58
Common errors that may produce inaccurate readings when using a Dial-Type Magnetic Pull-Off Dry Filth Thickness (DFT) gauge include:
Select All That Apply
- A. Failing to determine the base metal reading (BMR)
- B. Rotating the dial too fast when taking measurements
- C. Measuring ditty, tacky, or soft films
- D. Taking measurements too far from the edge of a surface
Answer: A,B,C
NEW QUESTION # 59
When using a sling physchrometer a very large difference between the wet and dry bulb readings indicates:
- A. Low Surface Temperature
- B. High Surface Temperature
- C. High Relative Humidity
- D. Low Relative Humidity
Answer: D
NEW QUESTION # 60
Safety Data Sheets must be carefully reviewed by:
- A. The Owner's personnel
- B. All personnel involved in the job
- C. The Application personnel
- D. The Inspection personnel
Answer: B
NEW QUESTION # 61
Galvanic corrosion occurs on which of the following substrates:
- A. Concrete
- B. Wood
- C. Fiberglass Reinforced Plastic
- D. Metal
Answer: D
NEW QUESTION # 62
Dew point is the temperature at which
- A. humidity decreases
- B. condensation occurs.
- C. the air is saturated.
- D. water freezes.
Answer: B
NEW QUESTION # 63
......
Check Real NACE NACE-CIP1-001 Exam Question for Free (2024): https://www.actual4labs.com/NACE/NACE-CIP1-001-actual-exam-dumps.html
Get all the Information About NACE NACE-CIP1-001 Exam 2024 Practice Test Questions: https://drive.google.com/open?id=10hfpnkp4ybrHIKra19uPXz33S0ICfI3U