NACE-CIP1-001 Exam Questions - Real & Updated Questions PDF
Pass Guaranteed Quiz 2022 Realistic Verified Free NACE
NEW QUESTION 17
Excess moisture during holiday testing can cause erroneous indications by creating a path across the surface of the coating to pinholes previously detected, or directly to the signal return connection.
This is often referred to as:
- A. telegraphing.
- B. transitioning.
- C. monitoring
- D. juxtaposing.
Answer: A
NEW QUESTION 18
Good records can provide maintenance departments with detailed information about ALL of the following EXCEPT
- A. when the coating will be reapplied.
- B. what items were coated.
- C. how the item was coated.
- D. what materials were used.
Answer: C
NEW QUESTION 19
Galvanic corrosion occurs on which of the following substrates:
- A. Wood
- B. Metal
- C. Concrete
- D. Fiberglass Reinforced Plastic
Answer: B
NEW QUESTION 20
When performing tests for oil and grease using an ultra-violet light, the NACE Inspector should be aware that:
- A. Presence of weld spatter may produce a false positive
- B. Ultra-Violet light may contaminant the surface
- C. Chloride salt may produce a false positive
- D. Synthetic oil or grease may not be identified
Answer: D
NEW QUESTION 21
Stripe coats are generally applied to:
- A. Complex geometric shapes
- B. a), b), and c)
- C. Welds
- D. Edges and corners
Answer: B
NEW QUESTION 22
Which is a component that supplies most of the features and functions of the material?
- A. pigment
- B. additive
- C. binder
- D. solvent
Answer: C
NEW QUESTION 23
Non Conformance Reports are completed by the Inspector:
- A. In every instance that an item does not meet the specification requirements
- B. In accordance with the specification's definition of a non-conformance
- C. When the Inspector and Contractor deem it to be a significant non-conforming item
- D. When the Inspector deems it to be a significant non-conforming item
Answer: C
NEW QUESTION 24
An Inspector should change position when:
- A. Only when directed by the supervisor
- B. The Inspectors position is not the majority position
- C. The Inspector is convinced by verifiable facts
- D. The Owner can save some money by the change
Answer: C
NEW QUESTION 25
Common errors that can produce inaccurate readings when using Wet Film Thickness (WFT) gauges include:
Select All That Apply
- A. Using a damaged gauge
- B. Dragging a gauge through wet coating
- C. Placing the gauge along the longitudinal axis
Answer: A,B
NEW QUESTION 26
A magnetic pull-off type gauge is a good choice when:
- A. When an intrinsically safe tool is required
- B. Accuracy is not required
- C. Performing an adhesion test
- D. When working on non-ferrous metals
Answer: A
NEW QUESTION 27
Prior to using Inspection Tools the inspector must:
- A. Read the manufactures' instructions
- B. Be trained on how to use the instrument
- C. Ensure the instrument is within calibration parameters
- D. a), b) & c)
Answer: D
NEW QUESTION 28
According to SSPC PA 2 a Spot Measurement is:
- A. The overall average of all readings
- B. The average of gauge readings taken in a 4cm (1.5 inch) circle
- C. The average of all spot measurements in a given area
- D. A single gauge reading
Answer: B
NEW QUESTION 29
In the event of a conflict between the project specification and the coating manufactures' product data sheet, the Inspector's first course of action should be too:
- A. Use the product data sheet as a guide
- B. Use the job specification as a guide
- C. Call the person who wrote the specification for clarification
- D. Call the coating manufacturer for clarification
Answer: B
NEW QUESTION 30
You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if the current trend continues, you expect to be outside specified conditions soon. The contractor advises you he is going to mix up the next full kit to complete his for the day.
Your FIRST preformed course of action is to:
- A. Advise the Contractor he cannot proceed
- B. Advise the Contractor of your readings
- C. Call your supervisor
- D. Advise the Contractor he can proceed
Answer: B
NEW QUESTION 31
Due to a previous premature coating failure the owner has required the original coating applicator to return to remove and replace 10,000 square feet of a failed three coat system at the applicator's cost. Due to the financial implications of another failure, the owner has offered you the job as the NACE CIP Level 1 Coating Inspector and explained that he expects you to be his "insurance policy" for this job. You have never been involved in a warranty job before and are unfamiliar with the coating system.
Your preferred FIRST course of action is to:
- A. Purchase Professional Liability Insurance prior to job commencement
- B. Review the Product Data Sheets and meet with the Coating Applicator 'prior to the pre-job meeting
- C. Meet with the owner and explain your limitations and concerns prior accepting the assignment
- D. Review the Product Data Sheets, and conduct a walk thru of the job site prior to the pre-job Conference
Answer: D
NEW QUESTION 32
To be of value the Inspector's documentation must be:
- A. Timely, accurate and concise
- B. Always handwritten
- C. Submitted before the end of the job
- D. Always typewritten
Answer: A
NEW QUESTION 33
A NACE Coating Inspector is permitted to transport coating material when:
- A. If the Inspector meets all the necessary requirements for Transportation of Dangerous Goods
- B. The Inspector should never transport coating material
- C. Asked to do so by the Coating Application team
- D. Asked to do so by the Owner's Representative
Answer: B
NEW QUESTION 34
Silicone coatings are typically:
- A. Applied in very' thin films
- B. Used as a sacrificial primer
- C. Applied in very thick films
- D. Used strictly in immersion service
Answer: A
NEW QUESTION 35
To achieve consistently accurate results with ALL alt test equipment
- A. wear gloves when sampling.
- B. avoid placing the sample discs on a surface.
- C. calibrate the instrument in the field.
- D. wash your hands before sampling.
Answer: D
NEW QUESTION 36
Passivation can best be described as:
- A. Complete elimination pf the corrosion process
- B. A protective metallic oxide surface layer that slows corrosion
- C. Treating metal with a liquid inhibiter
- D. A coating layer applied to the surface to inhibit corrosion
Answer: B
NEW QUESTION 37
Most industrial coatings are:
- A. Organic
- B. Resistant to concentrated sulfuric acid
- C. Inorganic
- D. Resistant to temperatures above 200C
Answer: A
NEW QUESTION 38
You have just received your NACE CIP Level 1 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:
- A. Accept the assignment without hesitation
- B. Review the NACE Attestation prior to making a decision
- C. Meet with the prospective employer to determine the scope of your role
- D. Advise the prospective employer that you cannot accept the position
Answer: C
NEW QUESTION 39
......
Get to the Top with NACE-CIP1-001 Practice Exam Questions: https://www.actual4labs.com/NACE/NACE-CIP1-001-actual-exam-dumps.html
Free CIP Level 1 NACE-CIP1-001 Ultimate Study Guide: https://drive.google.com/open?id=1brGHLSjUcBIT0UmWei8M02alTtXshthf